Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Interesting, your first example appears to be a Speedway Motors branded 1157 replacement, showing a spec’d 1” diameter. If that’s the case shouldn’t have any problem fitting one through your ’70 socket hole. The individual LED orientation on that bulb would not be recommended for a parabolic...
Umm yeah never say anything is absolute. Here are a pair I found in a minute on Amazon.
AMAZENAR 2-Pack 1157 BAY15D 7528 2057 2357 Extremely Bright 300Lum White 6500K LED Light,Non-Polarity 10-30V-DC 5050 18 SMD Replacement Bulb For Brake Light Tail Lamps Back Up Reverse Lights...
...worked but it evidently put strain some of the LEDs bc I burned one out.
The way I have been doing this is to establish sets of 3 or 4 LEDbulbs, each set has a resistor on the back side to allow it to be used with an increase in voltage. The resistor is selected based on doing the math to...
Yeah I tried swapping the led bulb that worked in socket 1, but wouldn't work in socket 2.
Looks like the bulbs only seat one way since the pins on the side are at different heights.
Since my ceiling height in my garage is 16ft. I went with (8) 4 bulb 4ft T5 (hi output) high bay fluorescent fixtures. Lit up my 20ft X 80ft garage with ease. I used those lights for about 5 years with no issues or failures. But I decided to go with LEDs because I was right on the limit of my 20...
5-3/4" Stock Glass Metal Headlight LED 4000Lm H4 Light Bulb Headlamp Set of 4 750363661614 | eBay
Octane makes a nice set,I can't vouch for the bulbs, I bought mine with halogens and replaced them with led's
...I am going is perhaps one of the harder ways. I could have used LED strips which would be much faster but I would not have the quantity of LEDbulbs (not sure if this is good or bad). I could have used an acrylic plate cut to the size of the lenses and then drilled for the LEDbulbs...
...a dash Cluster for a 62 Plymouth. I would like to significantly improve the background lighting. I understand that to change over to LEDbulbs in need to change the voltage regulator to something lower than the stock one which I believe is 5 volts? Can anyone tell me what is needed to run...
When LEDbulbs for the house first started appearing none were dimmable; now you can get dimmable LEDbulbs.
Do they now make dimmable LEDs for the dash? I haven't seen any yet, but maybe someone knows if they are now available?
No, I did not add a resistor, I went with this electronic flasher.
A buddy uses it on his Dart that he added LEDbulbs to.
He says it works just fine with that flasher.
Since I live close by to Octane (2) weeks ago I went back in because I wanted buy some LED taillights, he had a great selection and low prices. After deciding and buying the taillights the conversation shifted to LED headlights, I asked what he carried in 5.75" note I made no mention of my...