Search results for query: *

Thank you for the detailed expalnation.

I had Topher rebuild my motors and I installed new relays and limit switches. However, just last week, I shut the hood on my car and the left headlight motor started running and wouldn't shut off. To the point that my wires became wound up in a ball and it pulled the male plug out of the female...

I understand the fresh paint issue for grounds, well taken. Did you ground each Half of the tailights where the bolt fastens to the chassis inside the trunk? If you have a photo of that I'd be interested to see how you did that.

Yesterday I had no power at the resistance wire and it was not in good condition, so I changed it but the lights still did not work with the light switch on. I then removed the tape around the cluster of wires and found some bare wires, hard and dry ( see photo) , which I cut out about 12 inch...

I have a 67 Charger with 14" wheels and the 4 piston Bendix brakes. I agree with R14.

Great ads and great photos, keep them coming.

Good morning, today I am gong to tackle the rear tailight problem. My license plate light does not work. I know of the "bundle" of wires that are wrapped in tape and stuffed in the left rear quarter crevice under the spare tire. I will start there. I also am aware of the breaker in the driver...

The turn signal lights work, the brakes lights works but the taillights won't work with my light switch on at night. I have changed the headlight switch 3 times, with new switches. I am hearing the answer " IT'S THE GROUND WIRE". But how is it that my turn signals work and brake lights work but...

No Sale at $70,000. 1966 Dodge Hemi Charger for Sale at Auction - Mecum Auctions

I would not convert the manual window to auto. You will not find this to be an easy task.

I have 6 red caps. Let me know if you still need them?

Three years ago I bought the nipple from Bill Rolik Enterprises for $12. I can't remember where I found the information on the years which the nipple was used. I have a 67 Hemi Charger 4speed (1 of 58 made in 67). Bill Rolik Enterprises - Contact Information

I may have six red caps . I'll check this weekend and get back to you.

1966 Dodge Hemi Charger for Sale at Auction - Mecum Auctions Here is the Mecum Dallas link for the 66 Charger that sold for $49,500. The listing states the following: "All vehicles being offered from the Paul L. Kelsey, Kelsey Antique Auto Museum have been in long term museum storage. Any...

I couldn't find a 1964 Sports Fury manaual but I found a 1965, see link below: Plymouth Sport Fury 1965 Manuals

According to my Jamie Passon Trans book, page 24, C-99129 was the casting number for 1969. " These cases were machined in both 307 and 308 input bearing sizes. The 308 bearing was used on the 18 spline (Hemi) 4 speed. The 307 bearing was used on the 23 spline version. Both the 18 and 23 spline...

3 weeks ago I turned 71, it doesn't feel like I'm that old.

I have a 67 Charger and the attached photo I took today of the spring placement on the hood latch. Hope this helps. Bought the spring at ACE hardware.

Parking brake light when it it is engaged it lights up.

I had the same problem and bought a spring at ACE Hardware and installed. I'll take a picture of mine and send to you Thursday or Friday.