Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thanks for the reply. I should have said that I was going to narrow the ale for the deeper dish look. I was more concerned about the tire fitting in the tub?
I am moving springs inboard and installing the 3 inch wider inner wheel tubs from AMD. The pic shows the wheel/tire combo that I would like to run. The wheels are a 15x12 and the tire shown is a Mickey Thompson 325/60R15. My question is will this work without other modifications?
Ok sorry. I could have done a much better job of asking that question!
What I want is a regular street tire. The Mickey Thompson would work but I really don't care for the tread pattern. I want a lot of side wall but am flexible on aspect ratio.
I have a set of Magnum 500 wheels 14x7, 4.5 setback for sale. Good year redline tires. Wheels are in fantastic condition; tire are good but 10 years old. Lug nuts and center caps included. Lisbon Iowa 52253.
I am going to install AMD's 3 inch wider inner wheel tubs on my 67 GTX. This is my first time doing this. In looking at the factory flange between the inner and outer it appears to be "roll welded". Any tips or tricks for removing the inner would be greatly appreciated. Also,are there any good...
I've searched until my eyes bleed. I am embarking on a build that will test my skill set for sure. I would like to know what a good procedure is to determine rear end width vs wheel/tire combo. I will be starting from scratch on the rear of a 1967 GTX. To me it's kind of like what came first the...