Search results for query: *

This is what I mean Did you tried with light assembly in place? 73/74s (or at least those 73/74 I have worked on) doesn’t have that extra surface on license bracket, so I can install without deal with the light. The only difference is try to fit with or without light in place. That’s all.

I went through an old video of me taking the car apart and this is what it looked like. Picture below. The one you provided from eBay will not work. If I place the license plate bracket on the bottom two round rubber stops the bracket I have today is way higher than the number. Not allowing me...

Is the one you need. Maybe didn’t fit because it gets the wider screws provisions, meeting with rear license light assembly. Did you have the light bracket in place when trying to fit that? You need to remove the light assembly, fit the license plate assembly, then the light over the plate...

It's clever, untested, simple, improves some geometry, and if I had to do it all over, I would have tried it. And for the talented, replicable, maybe out of Inconel, just to step it up a notch.

Homemade fudge and peanut brittle. Mom could have been rich if she'd have started a candy business or a bakery. That woman could cook!

I did the same and initially kept the EPR valve in place. Not a problem. Later replaced hoses and also removed the EPR valve (maybe 3 or 4 years after the refrigerant “upgrade”), because stock hoses began to leak still being seasoned (per a Mopar magazine description on a conversions article)...

I bought this one a few months ago and it doesn’t quite fit. Need the one you have but can not find it

Bilstein does not make a Mopar specific shock. They are sort of remanufactured/upgraded to fit a Mopar. Try using their "Search By Vehicle" on their website if you doubt what I'm saying. https://cart.bilsteinus.com/

'50's and '60's were best. I was getting instead of giving. LOL

The main reason I would try to still make it from underneath the dash is because car is becoming also older, and every time you get anything dissasembled, it could get also broken along the process LOL

That is gorgeous

There used to be a lot of toys for small children that made loud noises. We woke our parents up early, unintentionally, by playing with the See-n-Say toys from Santa. You'd set the dial on the animal you wanted to hear and pull the string. "The cow goes, Mooo." It had to be super annoying...

Thanks for those pics. I just don’t know how I feel about that set up.

I bought a used 10k rotary two post and have to install it yet. It might be 9k...not sure. One of my friends is the shop foreman at a gm garage and set me up with it because it had some surface rust and they periodically upgrade there lifts. I have to do the concrete yet. Hoping really soon. I...

New ones can be had and the revolving color wheel.

My card was not actually debited but I called the company I placed the order with and they immediately issued a refund.

I've taken to storing parts in totes using the schema in the parts book. 09 Engine, 13 Frame, 14 Fuel, 23 Body, etc.

Maybe your lucky day Mopar 1972-74 Dodge Charger Rear License Plate Bracket | eBay Note this top provisions are wider. Mostly sure it also meets with light bracket provisions, so will need to remove light bracket and attach both at the same time, or license bracket first, then the light Must...

Here is a picture showing the top two and bottom two of the holes being filled with the gold colored bolts... ....The gold bolts attach the bracket to the drum knuckle. The top two bolts attach to the knuckle, the bottom 2 holes of the bracket attach to where the lower ball joint usually...

Hope y'all have a great one and a fantastic Holiday Season...cr8crshr/Bill :thumbsup::thumbsup::thumbsup::bday::bday::bday::usflag::usflag::usflag: