Search results for query: *

This is an old target and probably the last time I shot my 444. Handloads and a Burris 4x power scope at 100yds. Lever guns can shoot and the 45-70 is an inherently accurate cartridge.

thanks

The bracket is $60.... i think a serpentine system would be much more.. although i haven't priced one. NEW 1970-74 Mopar Small Block Alternator Bracket Kit | eBay

My Runner has 15x8 Welds on the rear with a 275-60-15" tire. Fronts are a Weld 15x3 with a 27" tall x 15" Mickey Thompson front runner tire.

Nice wood.

hi i just went out and bought some 15x 10 pie crust tires for my 1964 belvedere was wondering on what you guys thoughts if i should buy 15x8 or 15x 10 steel wheels to mount them and i have seen some rear r]steel rims on max wedge cars painted 2 different colours was this a factory thing i might...

What a joke! Greed and piss poor management ruins everything. I’m by no way endorsing self driving vehicles , I would take a train, bus or cab if I didn’t wish to drive... pretty dam simple! Other than traffic what isn’t there to like about driving? Freedom ! I would never think of wasting money...

i dont like the air volume from my install of factory vents in the dash. the under das would be a better choice for air volume . i installed my a/c compressor on the right lower side of engine but will need an electric fuel pump.

No response yet as he is going to the PRI show this weekend.

Item C on the second diagram above is the one connected to the HVAC control. My 71 has it.

Pex was the name I couldn't think of in my earlier post

Appears there is a rag stuffed in the hole for the original water control valve, so you have no control of the hot water. I put a Pex ball valve in both my heater hoses and remove the handles. They take up less space and look cleaner

I have a non AC 69 RR and I’m trying to decide whether to keep the original heater box and go with an after market AC system or install an original AC / heat box. A little background info, it’s not numbers matching and I’m converting to a four speed. I have all the AC factory components for the...

My memory IS serving me wrong… the one I meant is part of the plastic duct LOL.

Yes but, no… I meant that’s the way in fact must be installed, from rear to front. There are couple of wire hooks which hold the last bow in place holding against one of the roof beams and that will give you the correct location for the rest. Once bows are mounted then you stretch it on front...

It should be long enough to reach the HVAC control. A/C and HEATER harness are not part of the main harness. That’s the wire to feed the control switch to feed the blower either A/C or HEATER car. It should be inserted into the corresponding switch plug. It should be hot just with key in ACC or...