Search results for query: *

But it pushes not pulled to show how much. I guess it could be used to push the trigger?.

Looks like a trigger pull scale.

I picked this up with a bunch of tools I bought from a widow, so no clue. What is it? It has a spring inside that when it’s pushed in it shows a graduated scale.

The ground was isolated from the car. Nothing wrong.

or a 770cfm Street Avenger, dual feed, single pump/accel squirter is a great replacement carb for the Holley 3310 also

Ya, tell that to our Premier! I got nailed 2 months after I bought the car in 1990 for no front plate... Makes it easy to find in the parking lot though...

or notch the back of the air cleaner base too, with the 2 speed wiper motor it's not a very big '1/4 moon' type notch either I had to do it with my 1969/70 fresh-air style air cleaner base/for a 6bbl (with an aftermarket lowdeck MP 6bbl manifold) on my (not a 1970) 68 RR 383 335hp (org. had a...

The front plate has to go.

Hi McPorGuy please let us know how they turn out. I ordered the push button shifter block off from redvenomrepros as well as the one on my car is cracked.

I realized what I’ve done wrong. The short block I ordered did not include an eccentric and I missed installing one. I’ll have to pull motor and install. Rookie smh! Thanks all

If you can't find a used one, Van's Auto has new ones since they bought out Tony's Parts.

Thank you all for the replies. I really hope I find the pedal bar has the two holes drilled. I'm hoping to limit my time upside down under the steering column. Was difficult 25 years ago when upgrading my Dart. I was actually in shape then. Can just imagine what it will be like now. Vandan I...

I put a full pan in a 67 Belvedere by removing the taillight extensions and then cutting a 2” horizontal strip from the taillight opening to the trunk opening on both sides. After i slid the pan in and welded it, I welded the horizontal strips back in. Bodywork was minimal and the only paint...

Everything you need to know.... what will throw you off is they list it for 64-66 Dart. VS7-E/FL National Moparts # WS0013A Broke my 7UP Pop Machine today.... EDIT: I read it wrong.. but same thread applies, just follow it for a couple pages. It'll show you it goes on with glass setting tape...

Thats just what 'they' are admitting; the real numbers are most likely closer to adding another digit on that...:(

Beautiful car. I had a chance about 13-14 years ago, to buy a Road Runner similar to this one. That car had black interior, with the original Air Grabber under hood parts. It was really nice, but I didn't have enough $$ to buy it... just like this one.

An actual "mullet" is a good look for most.:thumbsup:

I just wanted to keep everybody updated I took the recommendations and copied a screenshot of the post and emailed it to Herbs Parts. I sent the email two days ago and I’m yet to get a reply. I would expect nothing different from this horrible company.