Search results for query: *

Hi Johnny…yes, vintage air.

I would like to see some pictures please

I found it...seems numbers 6 & 8 plug wires got up against the header and cracked the jacket. Need to devise a way to keep those wires away from the header. Thanks for all the input. Bob

New coil…less than 1000 miles on it. Put it on just before Carlise.

I always run 93

Both 4160 Holleys. Was 750 vac now a 650 vac. Had the 650 on to go to Carlisle and it ran great. Probably put a couple hundred on since then with no problem.

Yes I was!

Yes, I know. Hence my question. Looking for a checklist to guide me and my multimeter through the steps in the proper order…

Electronic

Hi all, Odd occurrence….my ‘68 Super Bee with a 383 and 4 speed has been running great. To Carlisle and back no problems. Out of the blue yesterday, it started fine and I went to a friend’s house and on the way it started to seemingly miss somewhat. On my way back home, it ran more and...

Requires QA1 K member as well.

Hi all, Getting ready to put a new/rebuilt front suspension on the Super Bee. I'm looking at the PST rebuild kit for the lower control arms, but would like to have a spare set of LCA's to weld up in preparation. I looked at the QA1 complete LCA but they don't work on a '68 with Sway Bar...

Thanks for all the info!! I'm going with the QA1 upper control arms (part number 52305). For the lowers, QA1 makes a set (part number 52308) but I am confirming they will work with my 1968 Super Bee with factory sway bar. If for some reason they do not work, does anyone else make lower...

Thanks for this!! I was just looking to see if there were any "magic" techniques for getting to the front oil pan bolts...Doesn't look like it. Bob

Hi all...I know our cars running hot can be an issue and there are many schools of thought on this, but I wanted to share my experience. After I installed the Flowkooler water pump, my Super Bee still ran quite hot, especially in beach traffic around here. I just want to put out here that I...

Hi all, Ordering a new oil pan gasket and pan stud kit for my '68 Super Bee. In the meantime, I have some drips on my concrete driveway. Using Dawn Powerwash, Brakleen, etc does nothing to get those stains up. What do you guys use to cleanup your oil stains off the concrete driveway...

Thansks Bob - I have the FSM. It's a 1968 383 in a Super Bee with an A833 4 speed. I'm ashamed to admit...I went back over everything again...F'ing (pardon my french) #3 plug wire was off. I would have bet a months salary that I absolutely made sure those plug wires were on properly yesterday...

Bob - thanks for the feedback. I wish I knew the story behind this car, but I've only had it less than 2 years and all of the "upgrades" to electronic ignition, etc were done prior to my ownership. I'm just trying to get it back running strong so I can drive it. So - to address some of your...

Hi all, Follow up to my posting in the Fuel and Air Systems Forum. As mentioned over there, new carb solved the issue of no squirter action. I'll dive into that carb and figure that out later. My immediate issue is that the car starts, idles and drives (383, 4 speed), but at partial throttle...

Thanks Bob. What fluid can I use to bench test instead of gasoline?