Search results for query: *

Awww. I see. Im not 25. I don’t use my personal information on nonsecure websites , best I can.

Must watch out, many new wheel cylinders have metric bleeders. Avoid a place with man in the name.

I have an Advantage 9k. These are getting a little pricey. I don’t think I paid over $4k in 2016 or 17. 120v also and no air to let it down. I would buy another one. Advantage DX-9000-HD | 9,000 LBS. 4-Post Lift

I drive mine as late in fall as possible. Fill with gas and drive it for 20 minutes minimum. When I park it for winter I put a plastic sheet over the carb and plug the exhaust with rolled up rags. Disconnect the battery. Yes I keep mine covered but it does make a better environment for mice...

That is two caps, not 9.... They have them listed as 9" not 9 caps...

I was out driving mine today...

When government subsidies dry up pipe dreams fail...

Most of the after market valve covers have no baffles in them. If you’re using a PCV system you will want baffles. Even if you’re just using breathers you’ll be better off with baffles to keep the oily film off your valve covers.

That chart shows recommended combinations, not the only available combinations... If your chosen combination was to weird they required a waiver which was noted on the broadcast sheet.... Had a buddy with a 70 Charger that required a waiver, FY1 exterior, Green top, Tan interior.. Bought it...

For those of us who live in the frigid, salted-road, deep freeze of the north, our babies have to sit for 6-8 months! What do you do with your classic? Cover or no cover? Up on jack stands? Do you go through muscle car withdrawal and wonder why you live where you live??? Well my Charger rests in...

Location has been listed in the description.

Forget about a jack. Call a rollback and get that baby back to the house if there’s going to be any jacking going on. Just saying. :drinks:

The 9.5” Dynamic in my GTX flashed to 4800 instead of the agreed upon 3500. I sent it back and after some friendly discussion Dynamic recommended a billet stator to tighten it up. In the many years since, it’s been a fantastic converter for my particular combo. Not inexpensive, but worth it…

I don't understand any of what you wrote there. I was focused on this: That flat spot is machined into the area below the oil band/recesses in the lifter body. The EDM solid lifters have the hole in the foot of the lifter but the hydraulics can't have that or they would not build pressure...

Compact floor jack. This just an example, I'm sure there are better ones. Note carrying case...

It would be worth a try to get melt or some similar material from an upholstery shop and lay it in. Not expensive,

We use Britbox. We really enjoy the British series that they have. Otherwise we have zero tv. In Mexico we just watch DVD’s that we buy here cheap at garage sales and bring to Mexico. When we are finished with them we give them away to whoever wants them.

Click on the member's name. Says your 25.