Search results for query: *

Never thought it was to be that hard to explain!

gas cap can go into a blast cabinet........ "aircraft stripper" is my go to for things that cannot be blasted

This is my 66 satelitte foot room. No modifications.

Nitro Rat, thanks for your comments. The XLERATORs we used and tested have welded cases, like the ones I built. This is one of the very early ones, a 14" case. These are relatively loud and that is due to the short case and the perf pattern they used. The big ones, like you mentioned, used a...

Don't get me wrong, my car is a stripped down hot rod. That being said, I barely ever even chirp a tire. I've got a big block A body to race with. The Satellite is just a cool driver. I appreciate you giving my thread the time of day to make an actual reply.

I see. Well, sounds like a neat setup. I would consider it just for the fact of not having to lug 40# bags of salt around. Just a couple of months ago I hurt my back doing just that. Unfortunately I don’t think i would have enough room in my pump house for installation. Also I read that the...

A bath in Acetone and a brass wire brush should do the trick.

A chemical stripper (your brand of choice), I have no real recommendations on brands & then neutralize what ever it is that you used, before you go forward & then, do like a 000 Steelwood buff, maybe clear it after, so it doesn't tarnish or rust I don't know if that is stainless or not

I used one of those Retro pieces a little while back. No issues that I recall.

Or, the brake pedal surface could be trimmed. Who needs that big of brake pedal anyway. Stopping in a hemi is over rated.

Damn. That's been sitting a looong time for the tree to grow into it like that...

Yep. In this case 1” would do it. Driving with swin fins appears unwise.

Bought a car with a very poor paint job. Since it will be impossible to color match, I want to remove the red paint, and retain the metal finish on the gas cap. What process is recommended to minimize damage? Thanks!

Nos glove box lock part number 2935900 shows as fitting 66-69 models probably 70 too but might be a superseded part number. Excellent condition with 2 keys. $80 shipped Parts are located in SE PA. Can send more pictures if interested. Pm here on the board. Thanks for free ad FBBO!

Try Stephens Performance

I'm the original owner of the car, and the current pump is the third one since new. The first two were replaced due to leaking at the flange. The pump installed on the car now is no different from the original configuration. The inlet and outlet are both at 45-deg. angle to the block and are...

KYB Gas Adjust are good enough for the money.

not a joke, folks ....... the struggle is real! :D

Obviously. :lol:

Is the Torrence's Capco Racing (T/F) even going to run this year ?, full schedule anyway ? I wonder if Tony Schumacher will have a ride too lots of ladies going to be in T/F May have to go with Antron Brown's team this season or maybe Britney Force JFR I'd love to see Tony Stewart do better...