Search results for query: *

Safety regulations for wimps. REAL men do dangerous jobs without getting hurt. Idiots can get hurt while opening an envelope even while wearing gloves and a hard hat.

Come on, man....Say it isn't so! Maybe I need to revise my opinion. British dudes, other people outside America.....

I friggin HATE these hats... Only British dudes and dorks wear these POS hats.

I have a Dakota Digital instrument cluster in my car. Two years back I wanted to try an FBO ignition box. When I tried it, the tach needle bounced. I tried soldering in a diode but it made no difference. The Dakota Digital people told me that their tachometers sometimes react this way with some...

Holy crap, that is a rape job. I just got a 360 back from my machinist in California. $950 to bore, hone, hot tank block, install cam bearings, light surface to decks. Resurface heads, light valve job. Hang new pistons on original rods. I tore it down, I'll reassemble it. Almost $9,000 to build...

Yeah? To filter what? Filters get clogged and need replacement. Could it be there to slow exhaust flow so the converters are more efficient?

For years, I thought that this was a converter.... The truck has a 5.7, I've owned the truck since it was new. I removed the huge muffler and resonator that were further back when the truck was still new but I never touched the exhaust forward of the Flowmaster you see here: I always...

A popular term is "Fender Tag". Chevrolets and other GM products often referred to them as Data Plates.

Uhhh....The wheel rate will also be affected by the length of the lower control arms. Most of you will be surprised to know that the A body cars has lower control arms that were 1/2" longer than the B and E body LCAs. That can make a difference even with the A cars having a 37" bar and the B/E...

The cuts are in the tunnel exclusively. This requires a much slimmer cover to close off the opening. Cardboard was used to make a template: Steel sheet metal was then shaped to fit. Seam sealer and it is weathertight. The cutting was minor and could be reversed if someone...

"Cut the car up"? Nobody cuts their car up to install the popular Tremec 5 speed. There are several threads on the forum about installing these, I had one 4 years ago but THIS one covers the updated Tremec TKX version of the transmission that is slightly more compact: Tremec TKX 5-Speed...

To be clear, that is not a VIN tag. The VIN for your car is likely mounted in the left door mounting pillar below the windshield.

While that is terrible, it is not common. Bad news travels faster than good so your story gets mentioned before the 50 other guys with 10 year old tires and no failures.

The date issue is worth noting. I would be a bit annoyed but…. If you are like me where you sometimes wear a tire out before it ages out, it isn’t a problem. The last time I ordered tires through Summit, there was a shipping issue. They ended up shipping three tires instead if the pair that I...

THAT is fine. People often seem to like shortening a word as if speaking two whole syllables is just too difficult for them. Here is one that is annoying....Door Cards. Guess what? Most of our classics were built in America and stayed there. This is not Great Britain where terms like these are...

If you used a stock computer from the donor vehicle, how would the PCM in the vehicle maintain a proper air/fuel ratio? I am unsure.... would the engine stay in closed loop? Would the Air/Fuel ratio be essentially preset and not continuously adjusted as I understand that they are with a...

Yeah, it is not a popular one either. The overwhelming majority of members threw in support for the OP because he did what most men do.