Search results for query: *

I have some heads for our 340 that have been machined and I want to lower compressor back to factory or below. Is their a rule of thumb for how thick a gasket has to be in order to lower compression considerably. I was thinking about putting a .075 compressed gasket on instead of thinner ones...

I need to get a air intake with a EGR valve system does anyone make one for a 340 motor? I am running a carter 4 barrel and all is original except purple cam shaft. Running around 10 to 1 compression and it spark knocks. We suspect bad gas but have tried 100 octane low lead from the local air...

Thanks for the info.

So you still think it is seals?

No slip in reverse has happened to me yet.

I do not have to shift it back into drive. I put the transmission Back into the car after it had sat for about 10 years in the garage. My dad had thought he had blown a cylinder wall when he just blew a head gasket. He did not have the money to fix the blown cylinder since he was sending...

I have a problem with the car jumping into neutral. I have checked the fluid level and it is fine no leaks. I have a extra deep pan on this transmission. Any ideas on what is the problem internally? The transmission is attached to a 340 motor. I think the transmission is a 727 though.

I would add race fuel if they sold it in my area. I would have to travel about 60 miles to get close enough to a race track.

I have gotten premium fuel but that just means more alcohol in my area. I just does not help. I have tried a e85 and regular mix that a racer told me he had been using to gain octaine but that did not help any either, What id the best octane booster?

I have had problems with spark knocking with the bad gas we are getting in missouri. I put bigger primaries in and that solved the knock at crusing speed but it still does it when you get into the throttle. Do I need to open the secondaries up more? Carter Avs

Last time I checked they were out of stock anyone know how oten these are restocked?

Thanks that is wht I have seen in pictures but I just wanted to make sure.

On the original cars that year with air conditioning where were the air vents Under the radio or on the outer edges of the dash under the overhang?

Need door seals for the car anyone know where to buy?

we measured tires off of our Dart and they are 235/70 R15 whose tread measures 7.5 inches wide.

tire measurements the front tire measures 7.5 inches wide of tread and the back measures about 9 to 10 inches of tread width. Sidewalls are 5.5 inches high frot and back Front 85 inches around and the backs are 87 inches around. Fronts are 670-14 Backs are L60-14 Are their any...

I Have a 1968 Dodge Coronet with 14" mag wheels 7" wide. I want like a 235/70 R14 on the front. Back I was thinking I want as wide as I can get. I want BF Goodrich but the web site only list these sizes: P215/60R14 P215/70R14 P225/60R14 P225/70R14 P235/60R14 P245/60R14...