Search results for query: *

I'll would go with 3/8 to 1/2 inch lines there is a companythat makes 1/2 fuel pickup and also would go to a minimum of 140 pump

Hey now, I'm not stupid I know that b and rb motors have a 1.5 rockers and if you switch to a 1.6 you will gain 30 to 40 more lift, also know that the springs have to be change for the higher lift and have to check for valve clearences. And just because YOU never heard of 1.7 rockers it does...

Hello, has anyone ever used 1.7 roller rockers in a b or rb motor?

Have you ever use 1.7 rockers in your mopar?

yeup no problem there

Hello, it shoud take less than a minute to get oil pressure and who ever told you that it won't go to the top is wrong. If you are not getting pressure your oil pick up is not on, no oil in the pan , lifters are out or you have a mayor internal leak.

Sorry , It a stock 78 motor with a 310 dur 510 lift at 110 center with a 671 with 2 750damons at 5 psi

Hello , what brand of conversion did u use?

Hello, you are supose to remove the dist and gear then use the priming tool

1.5 stock rockers

I have a 440 with stock rockers will it help to put 1.7 roller rockers?

Hello, 68 chicken I have own this car for 36 years and a lonk time ago I switched the front drums to disk of a 70 roadrunner with a single piston caliper I remember removing the proportional valve, spindles,sway bar but I dont remember changing the master cylinder . I was reading somewhere that...

steering Hi , I have a manual column of a 68 runner and need one with power will it fit?

Hello, has any one ever use electric brakes? Also my 68 roadrunner has disc brakes up front drum rear, now my question is , my master cylinder has a bolt in the middle is that the right one?

Hello , is the passenger side.