WTB “2 bbl” Poly 318 intake

[rumblefish360]

Hey gang;


Looking to return a ‘66 Charger to stock. I’m just missing the intake manifold.
I’m located in Grant Florida, let me know what a total would be for the 2bbl Poly intake manifold shipped. I don’t if these are date coded. But that would be a plus, though not necessary.

TIA, rumblefish360

 

[LB0442]

About a year or so ago I took a pickup load of 318/904 parts to the scrap yard, got $26 bucks for it. There were 2 poly intakes in there. I did go through my shed and found this one. Only 1 left. You can have it, but you would have to pay for shipping. According to my super accurate bathroom scale it weighs 45lbs (seems heavier). About 16" x 21".

We are going to snowbird in Phoenix from Dec 1 to March 1, if you are interested I'm not sure if it will get done before that, can you wait until spring?

I'm pretty sure this is the motor it came off of. It had a 65 casting date on it.

 

[LB0442]

Possibly someone is going from Phoenix to Florida in that time frame? I could drop it off with them.

 

[Moparguy59]

Hey gang;


Looking to return a ‘66 Charger to stock. I’m just missing the intake manifold.
I’m located in Grant Florida, let me know what a total would be for the 2bbl Poly intake manifold shipped. I don’t if these are date coded. But that would be a plus, though not necessary.

TIA, rumblefish360

I’ve got a 1965 seems to be in good shape
I’m at $60

 

[Ron H]

I have one off my '63 with the carb, I'd give it to you, though the shipping nixes the idea..

 

[rumblefish360]

I’ve got a 1965 seems to be in good shape
I’m at $60

Seems to be in good shape? If you could snap a few pictures I’d appreciate it.

 

[rumblefish360]

I have one off my '63 with the carb, I'd give it to you, though the shipping nixes the idea..

Allow me to decide on what exactly kid’s the worth of anything to me unless you don’t want the exercise of packing it, boxing it and taking the drive down to ship it.

Pictures if you would.

Thanks

 

[rumblefish360]

About a year or so ago I took a pickup load of 318/904 parts to the scrap yard, got $26 bucks for it. There were 2 poly intakes in there. I did go through my shed and found this one. Only 1 left. You can have it, but you would have to pay for shipping. According to my super accurate bathroom scale it weighs 45lbs (seems heavier). About 16" x 21".

We are going to snowbird in Phoenix from Dec 1 to March 1, if you are interested I'm not sure if it will get done before that, can you wait until spring?

I'm pretty sure this is the motor it came off of. It had a 65 casting date on it.

View attachment 1761094

View attachment 1761095View attachment 1761096

Which intake is “The Intake” pictured you have ready to go?
I’m ready for it ASAP, so, please, if you don’t mind dropping that into the shippers hands after I pay you the fee, let me know.

 

[LB0442]

Yes it is the one in the picture, hadn't heard anything for a few days so I took it back up to the storage shed.

I did check fedex and 50lbs, 16" x 21" x 7" high, from zip 83716 to Grant Fl is going to be $129. Now here is the big issue, I will leave Friday after Thanksgiving for Phoenix, will be there for 3 months.

Do you know of someone in the Phoenix area I could drop it off with?

I looked and do not have a box for this, do have some packing material though. Possibly I could drop it off at a packing and shipping place, you will have to make that call for estimates. There are UPS stores here, mailboxes and more stores. I have never had that done, possibly someone here has another idea?

 

[rumblefish360]

I know no one in Pheonix.

If this is to much effort for you in the short time you have left before your travels, don’t worry about it.

Overall cost I’m not worried about. Thanks.

 

[rumblefish360]

I’ve got a 1965 seems to be in good shape
I’m at $60

PM coming