1967 Hemi Coronet R/T - what is the correct fan? HELP

[1968rt]

Trying to find out what the correct fan for 1967 Coronet R/T hemi. Auto, built on March 16th

 

[DGE330/NC]

i'm thinking 7 blade clutch fan .

 

[AR67GTX]

Good question. Some in the 66/67 period seem to have run clutch fans and some seem to have run direct drive fans. I’ve never heard of a good explanation for the variance - different plant? Auto vs 4-speed? Engineering change?

 

[1968rt]

From what I have researched, early built cars came with 4 blade fixed fans. This car is a later built, should have a 7 blade fan. I cant find any info on a clutch or not. Service manual only shows the 4 blade option. My expert friend says 7 blade clutch. Not sure which way to go. Trying to keep the car close to original.

 

[Dave6T4]

I sold one earlier this year to a forum member for his 1966 Hemi Belvedere. I believe the number on the fan blade was 2585376. The number decoded to '66-'67 cars with H.D. cooling package (basically, cars with 26" rad). 7 blade aluminium fan with clutch.

 

[Fran Blacker]

My St Louis built March 66 Hemi Satellite 4 blade fixed fan.

 

[autoxcuda]

My St Louis built March 66 Hemi Satellite 4 blade fixed fan.

Auto or 4spd?:

rear gear ratio?:

 

[1968rt]

Auto or 4spd?:

rear gear ratio?:

auto, 3:23

 

[Fran Blacker]

Auto

 

[rt67440]

Greetings: I have a 67 Coronet R/T 440 4-speed. It is an original car and I am the original owner. i have the aluminum fan with the 2806070 clutch fan. My understanding was that the 440 4-speeds came with the aluminum with clutch and the automatics came with the metal and no clutch. Maybe the Hemi's were the same in 67. Hope this helps. Also has a DANA 3:54

Jack G.

 

[hemidart1]

4 blade fixed on my 67 Hemi