1969 Dodge Coronet R/T Deck Lid "D O D G E" Letters

[lyndondb]

Yeah I know these are pretty much non-existent, and Jack's has been promising me for two years. But., with that said if
anyone has a good set or knows someone who can restore mine (not bad but would like them as perfect as the
rest of the car) please let me know.

Thanks.

 

[detroit_inc]

Deck Lid Letters

Yeah I know these are pretty much non-existent, and Jack's has been promising me for two years. But., with that said if
anyone has a good set or knows someone who can restore mine (not bad but would like them as perfect as the
rest of the car) please let me know.

Thanks.

Are these the same letters used on the 68 Coronet tail panel?

Part numbers 2840573 to 2840577

 

[b-star69]

have you tried Mitchel's in Fairmont Ga

 

[lyndondb]

No, not the same as 68, must be 1969.

- - - Updated - - -

Mitchel's? no, do they have a website?

 

[b-star69]

the web address is.....www.mmpar.com went up there one time with my buddy to buy the letters P.L.Y.M.O.U.T.H he only charged $150and it was nos not repoped. he also let us roam the property and look at hundreds of cars.

 

[1969CoronetR/T]

Old thread opened, but:

No one reproduces them. Jacks Auto in New Jersey has reproduction ones on back order since 2010 (I know because I called back then and continue to call every six months). I finally had a place 3D print them and cast them and hope to have them back from the chrome shop this week or next week. I paid for the research and development so they should be cheaper by a few hundred dollars for others that order the letters. The place charged me $700.00 so I am assuming sequential orders will be a little cheaper. Expensive, but worth it if yours are broken and pitted. PM me if you are interested. Here are the letters before being chrome plated and painted. Once I get them back completed I will post a final picture.

 

[lyndondb]

final

The picture didn't come through, could you send again please?

 

[1969CoronetR/T]

here is the before chrome plating and painting (bare metal).

 

[driver]

Come see me at the nats
space G23 TO G29
I have lots of letters I may have what you need.

 

[1969CoronetR/T]

I had a set 3D printed, cast, chromed and painted already by a custom car shop.

 

['68 Charger]

There, fixed it for you.