• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1969 Road Runner preservation

A few before, and after pictures of the door jam. I’m looking for suggestions on how to preserve the old Service stickers? They are hard to read now. The top sticker is showing 27,883 miles on 7/8/71 and the bottom sticker is showing 29,457 on 10/27/72.
He put a lot of miles on the car in the first two years and then slow down. Clearly switching to a more cost efficient car with the gas crunch of the early 70s.
Thanks
Pat


IMG_5758.jpeg
IMG_5742.jpeg
IMG_5759.jpeg
 
They look pretty close to falling off. If you get them all the way off without damage I bet you could get them moist and press them flat (maybe sandwiched in tin foil). After flattened, spray adhesive on the backs before reapplying.

If they’re still stuck on in places, heat will sometimes be enough to soften the old adhesive.
 
I'm going to go way out on a limb, can you have reproductions' made ?, take good pix and get a shop to make them?, sure it might cost, but you get a vinyl sticker that will last, just a thought
 
Floyd said:
They look pretty close to falling off. If you get them all the way off without damage I bet you could get them moist and press them flat (maybe sandwiched in tin foil). After flattened, spray adhesive on the backs before reapplying.

If they’re still stuck on in places, heat will sometimes be enough to soften the old adhesive.
Click to expand...

They are very delicate, you can see where part of it has already ripped where I tried to remove it. I need to find a donor sticker to do some testing. I’m thinking that I could tape it off and spray it with a mat clear to help preserve and strengthen the paper??
Thanks for the suggestion!
Pat
 
GOLDMYN said:
I'm going to go way out on a limb, can you have reproductions' made ?, take good pix and get a shop to make them?, sure it might cost, but you get a vinyl sticker that will last, just a thought
Click to expand...

That would definitely be the way to go with a full restoration, but I’m trying not to take anything off this car and keep it as original as possible so preserving the existing sticker is what I’m trying to come up with.
Thanks for the suggestion!
Pat
 
I would not put any tape on those, when you peel it off it will likely take chunks off. I would leave em be and work around them. I think the door looks great as is!
 
T2R9 said:
I would not put any tape on those, when you peel it off it will likely take chunks off. I would leave em be and work around them. I think the door looks great as is!
Click to expand...

Yes agree, I would tape around them so not get the mat clear over spray on the green paint. I still need to test the mat clear on the paper.
Thanks
Pat
 
I had Paul at Home
Rebuild the original alternator and starter for the RR. He was great to work with and send me progress reports with pictures along the way. Very cool!
Thanks
Pat

IMG_7404.jpeg
IMG_7405.jpeg
IMG_7406.jpeg
IMG_7376.jpeg
 
Awesome car and I really appreciate your approach to preserving it. This is the kinda car that I will always gravitate towards at any show. Restored cars are nice but these are a whole different level as far as I'm concerned. Many times, it takes way more effort and patience to preserve vs restore, atleast for me. I totally dig it!!!! and wish I had it!!!
 
RSMS said:
Awesome car and I really appreciate your approach to preserving it. This is the kinda car that I will always gravitate towards at any show. Restored cars are nice but these are a whole different level as far as I'm concerned. Many times, it takes way more effort and patience to preserve vs restore, atleast for me. I totally dig it!!!! and wish I had it!!!
Click to expand...

I feel the same about Survivor cars. They are definitely the rarest and I love the stories that come with original unrestored cars.
Thank you!
Pat
 
dadsbee said:
It's going nice Pat, when you find another one of these give me a call for f sakes ! LOL
Click to expand...
Finding them is hard enough, acquiring them can be the most difficult part. It’s hard for owners/family to sell the memories.
Thanks
Pat
 
Speedbird said:
Stainless gas tank. Your judgment call depending condition.
Safety first. My opinion is the car has modification already. Why not? And I've had bad experience with repo galvanized tanks.
Stainless lines from Inline tube. Do it only once.
Click to expand...
I was successful in preserving a fuel tank out of a 1934 Chevy and I’m going to give this one a try, fingers crossed:)
Thanks
Pat
 
keepat said:
I feel the same about Survivor cars. They are definitely the rarest and I love the stories that come with original unrestored cars.
Thank you!
Pat
Click to expand...
Without a doubt they are the hardest and most rewarding cars to be part of. I'm always on the hunt for them. I'm working on a 59k mile sunroof GTX currently, I just started a thread on it as I start to go thru it, take a look if youre interested, in in the owners project forum also. I wish the paint was in the same condition as yours but I'm hoping I can get it "close" only with more patina. So glad to see others putting in the effort to keep them as original as possible
 
You must log in or register to reply here.

Similar threads

R
1973 B5 blue w/red stripes Road Runner GTX sunroof car with 59k mile original paint original survivor
2
Replies
31
Views
1K
RSMS
R
TBZ67HEMI
Turbine Bronze 67 GTX HEMI 4 Speed
2
Replies
32
Views
2K
68 HEMI GTS
68 HEMI GTS
B
Looking for Original Hemi Block for my Road Runner. RM23J9G282315
Replies
2
Views
309
vance.dykes
vance.dykes
E
1970 road Runner gauge Cluster problem
Replies
5
Views
465
steve817
steve817
joerachet
  • Locked
FOR SALE 1969 Road Runner Satellite radiator support
Replies
0
Views
299
joerachet
joerachet
Auto Transport Service
Back
Top