'68 Charger
Well-Known Member
Contact seller
Hello FBBO members,
Parting out a 1973 Plymouth Satellite. This was a 318 auto with A/C, buckets, slap stick, rallye cluster, tan interior. No motor.
Sorry but I'm late posting this ad and some parts have been already sold, they are:
RH fender
LH fender
Trunk lid
RH door
Front windshield
Rear bumper/brackets/reinforcement bracket
Tail light lenses (housings still available)
Upper cowl
Bucket seats
A Pillar trim RH & LH(interior)
Rallye gauge cluster
Trans.
K frame
Prices on some of the key parts:
Grille PIECES for repairing other grilles $30.00
Grille upper trim, dents $50.00
Header paner trim, dents $50.00
Flat hood $50.00
Roof $350.00
Front disc brakes set-up 11" pin type (spindles/knuckles/rotors/calipers&bracket) $275.00
Upper A Arms $50.00 (pair)
Lower Control Arms $50.00 (pair)
Rear windshield (factory tint) $100.00
Rear windshield Trim (aluminum) $100.00 complete
Front windshield Trim (top aluminum, bottom and corners stainless) $100.00 complete
Side door glass tint $40.00 each
Quarter glass tint $40.00 each
Front bumper shell $125.00
Front bumper brackets $75.00 pair
Front bumper reinforcement bracket $50.00
Front bumper guards $100.00 pair
LH door $150.00
Header panel $100.00
Headlight bucket brackets/buckets/rings $60.00 pair
Front valance (thrashed) $40.00
Rear valance, 1 brace needs welded back on, surface area mint $175.00
Rear tail light housings $125.00
Front lower door panels (tan) no chalking $60.00 (pair)
Front upper door panel, tan with wood grain (RH) descent shape $30.00
Rear upper door panels, tan with wood grain fair shape $30.00 pair
A/C heater control very clean no cracks, no broken vac ports $75.00
Auto Slap Stick (linkage sold)
- Shifter (no T handle, no bezel) $75.00
- Console brackets (3) $75.00
- Console brackets attached to floor/hump cutout section $125.00
- Wood grain plate (needs new wood grain paper) $40.00
- Tan console shell (no door, broken, cracks) $30.00
Many more parts, please ask if available and for pricing. Pics available upon request.
Prices above do not include shipping cost. Parts are located in Las Vegas, NV. Local pick up is available. I can ship Greyhound for big parts.
Thanks
Parting out a 1973 Plymouth Satellite. This was a 318 auto with A/C, buckets, slap stick, rallye cluster, tan interior. No motor.
Sorry but I'm late posting this ad and some parts have been already sold, they are:
RH fender
LH fender
Trunk lid
RH door
Front windshield
Rear bumper/brackets/reinforcement bracket
Tail light lenses (housings still available)
Upper cowl
Bucket seats
A Pillar trim RH & LH(interior)
Rallye gauge cluster
Trans.
K frame
Prices on some of the key parts:
Grille PIECES for repairing other grilles $30.00
Grille upper trim, dents $50.00
Header paner trim, dents $50.00
Flat hood $50.00
Roof $350.00
Front disc brakes set-up 11" pin type (spindles/knuckles/rotors/calipers&bracket) $275.00
Upper A Arms $50.00 (pair)
Lower Control Arms $50.00 (pair)
Rear windshield (factory tint) $100.00
Rear windshield Trim (aluminum) $100.00 complete
Front windshield Trim (top aluminum, bottom and corners stainless) $100.00 complete
Side door glass tint $40.00 each
Quarter glass tint $40.00 each
Front bumper shell $125.00
Front bumper brackets $75.00 pair
Front bumper reinforcement bracket $50.00
Front bumper guards $100.00 pair
LH door $150.00
Header panel $100.00
Headlight bucket brackets/buckets/rings $60.00 pair
Front valance (thrashed) $40.00
Rear valance, 1 brace needs welded back on, surface area mint $175.00
Rear tail light housings $125.00
Front lower door panels (tan) no chalking $60.00 (pair)
Front upper door panel, tan with wood grain (RH) descent shape $30.00
Rear upper door panels, tan with wood grain fair shape $30.00 pair
A/C heater control very clean no cracks, no broken vac ports $75.00
Auto Slap Stick (linkage sold)
- Shifter (no T handle, no bezel) $75.00
- Console brackets (3) $75.00
- Console brackets attached to floor/hump cutout section $125.00
- Wood grain plate (needs new wood grain paper) $40.00
- Tan console shell (no door, broken, cracks) $30.00
Many more parts, please ask if available and for pricing. Pics available upon request.
Prices above do not include shipping cost. Parts are located in Las Vegas, NV. Local pick up is available. I can ship Greyhound for big parts.
Thanks
Last edited: