WTB 1973 Road Runner quarter panels

[FREDDIEBEAR]

I am new to the website and looking for quarter panels. No luck with my buddies out West or south, but someone mentioned a guy in Canada that may have the molds to make them. Any suggestions would be greatly appreciated.

 

[Ron_M]

Welcome. As an owner of one of these cars, I suggest this:
FOR SALE - 73-74 2 door Satellite body cuts/ rust free shell

 

[YY1]

There's a guy on FBBO that makes 66/67 quarter panels.

I've not heard of him, or anyone else, making 73/74 panels.

For a while, AMD made panels from the 12 o'clock position of the wheel arch back.

There's a rumor, and I own both and can verify it's real close...

...that you can use a the wheel arch section of a 72-80 truck fender!

 

[RSMS]

There's a guy on FBBO that makes 66/67 quarter panels.

I've not heard of him, or anyone else, making 73/74 panels.

For a while, AMD made panels from the 12 o'clock position of the wheel arch back.

There's a rumor, and I own both and can verify it's real close...

...that you can use a the wheel arch section of a 72-80 truck fender!

I've also heard this, luckily, I don't need them, but I will have to put a little thought into comparing the two. That would definitely be a good thing to know for future projects. Has anyone ever seen them cut out and lined up as a replacement? Share your knowledge if you have.....lol

 

[YY1]

I've also heard this, luckily, I don't need them, but I will have to put a little thought into comparing the two. That would definitely be a good thing to know for future projects. Has anyone ever seen them cut out and lined up as a replacement? Share your knowledge if you have.....lol

"Cheap" truck fenders are available from LMC Truck-

https://www.lmctruck.com/body-compo...iy4qeR6Ud47vPlhlh7fs9HMS_00cy7HsGM0-vXr8nobzy


...and it looks like a truck wheel arch is also available-

1580-147 L Key Parts Wheel Arch Repair Panel Driver Left Side Upper Hand | eBay


Might be worth the $$ or $$$ just to see for sure.

...assuming the stamping is correct.

The last time I compared them, even the line behind the arch matched the line on the B body!

However, I want to say the left side on the truck matched the right side on the car.
That's if my memory is working correctly.

 

[FREDDIEBEAR]

There's a guy on FBBO that makes 66/67 quarter panels.

I've not heard of him, or anyone else, making 73/74 panels.

For a while, AMD made panels from the 12 o'clock position of the wheel arch back.

There's a rumor, and I own both and can verify it's real close...

...that you can use a the wheel arch section of a 72-80 truck

There's a guy on FBBO that makes 66/67 quarter panels.

I've not heard of him, or anyone else, making 73/74 panels.

For a while, AMD made panels from the 12 o'clock position of the wheel arch back.

There's a rumor, and I own both and can verify it's real close...

...that you can use a the wheel arch section of a 72-80 truck fender!

Do the truck fender arch panels have the secondary styleline also?