• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE 440 six pack intake and carbs (orig aluminum)

Status
Not open for further replies.

northerndave

Well-Known Member
Local time
11:46 AM
Joined
Jul 22, 2010
Messages
1,794
Reaction score
429
Location
Minnesota
Feedback: 0 / 0 / 0
Contact seller
Hi guys, I accidentally listed this in "performance parts" sorry for the double post.

I may be incorrect on my mopology here so please do correct me if you feel I am misrepresenting.

I have what I understand would be an original aluminum six pack intake for 440, This has the following part number markings.

CHRY 3412046

12364283_10203786520103569_1832150787_o_zpsghnbillz.jpg


It does not have the "CH6B" (this seems somewhat important to some people)

12325865_10203786611905864_750994670_o_zpsmyuen8rr.jpg


IMG_20151207_083010740_zpspwcmogkb.jpg


Firing order and individual cylinder numbers on each runner.

IMG_20151207_083020996_HDR_zpsmrzxaqau.jpg


Dist rotation marking

IMG_20151209_093625329_HDR_zps1dyfrqan.jpg



Carbs are 4394, 4392, 4393

12347822_10203782811130847_1028690075281592092_n_zpsi0mt6bqi.jpg


12308539_10203782812330877_3878118716059205367_n_zps7elnwubd.jpg


outboard carbs are missing vac actuators.

I also have an air cleaner that goes with it but it's not much good, someone took a grinder to the lip that runs the perimeter of the oval on both lid halves.


12301472_10203782813770913_6095045025451069282_n_zps3ujsgn7j.jpg


12311073_10203782814490931_1278202412424621059_n_zps8vjtcy8l.jpg


Based on the part number, the absence of the CH6B marking, the firing order and dist rotation markings, I am told this is a factory original aluminum intake.

I could toss it in the media cabinet and clean it up, but wanted to list it and show it as I found it.

I'm asking $1200 for it.

I'm in northern MN
 
Last edited:
Could you post the date codes for the carbs?

Thank you.

D
 
the center (4392) is 1019, the rear (4394) is 1139, front (4393) is 9829.

I also see that currently the front and rear carbs are not in the right spots, front carb is in the rear spot, rear is on the front spot. not sure why.

I can take pics of codes if you like.

Also it looks like these were for auto trans, I'm sure you guys knew that though.
 
I noticed that one of the outboard throttle shafts was inserted from the wrong side of the carb. I looked closer and there are no butterflies on that shaft. Also noticed at the same time that the float bowl doesn't look right on that carb, fuel inlet on the wrong side.

With that new info, I'll ship lower 48 for $1000
 
Status
Not open for further replies.
Auto Transport Service
Back
Top