56 de soto hemi

[Pistol Pete]

I would think the headers are going to be an issue. Most 1st generation hemi stuff is either Zoomi's or block huggers.

And welcome to the forum, I'm looking forward to your build.

 

[lowlifeccc]

I would think the headers are going to be an issue. Most 1st generation hemi stuff is either Zoomi's or block huggers.

And welcome to the forum, I'm looking forward to your build.

Should I post some pics as we go

 

[lowlifeccc]

Should I post some pics as we go

Where are you based

 

[Pistol Pete]

Should I post some pics as we go

Absolutely.

 

[Dave6T4]

My neighbour is putting a 1955 DeSoto Hemi and Powerflite in his 1945 Dodge pickup.

 

[66fs]

Hi everyone this is my first post so be nice to me has anyone ever put a 56 desoto hemi in a 66 satellite? It’s sort of in but very tight on the heads and have y stuck with the original steering box

View attachment 1776585

View attachment 1776586

Nice, I'm redoing a 330 Desoto Hemi to put in a 67 Barracuda. Not there yet, I did research on putting a 354 Chrysler Hemi but quickly decided that was too much for me. The Desoto Hemi is very cool as the motor mounts are pretty much the same as a small block Mopar, so all you need are 66 Satellite 318 motor mount brackets and insulators. The block is 5/8 shorter than a standard 318 but you need a 1 inch adapter plate to mount a modern small block transmission, so the transmission should be 3/8 of an inch farther back in the car. Desoto Hemis are smaller and lighter than a Chrysler Hemi, but can still make plenty of power. Easily 1 hp per cube and they don't stop pulling at 5,000 rpm. Looks like you have a good start with the intake and aluminum timing cover and water pump.

 

[lowlifeccc]

Nice, I'm redoing a 330 Desoto Hemi to put in a 67 Barracuda. Not there yet, I did research on putting a 354 Chrysler Hemi but quickly decided that was too much for me. The Desoto Hemi is very cool as the motor mounts are pretty much the same as a small block Mopar, so all you need are 66 Satellite 318 motor mount brackets and insulators. The block is 5/8 shorter than a standard 318 but you need a 1 inch adapter plate to mount a modern small block transmission, so the transmission should be 3/8 of an inch farther back in the car. Desoto Hemis are smaller and lighter than a Chrysler Hemi, but can still make plenty of power. Easily 1 hp per cube and they don't stop pulling at 5,000 rpm. Looks like you have a good start with the intake and aluminum timing cover and water pump.

Thanks and thanks for the information on engine mounts ect