6 Pack fuel lines

[old timer]

Looking for a little more than the stock lines . Does anyone make a ' custom ' set-up or is it something that I'd have to get all the seperate pieces and cobble it together myself ? Open to other thoughts and suggestions...:icon_confused:

 

[Meep-Meep]

Those carbs are pretty cramped so you might have a fight on your hands trying to squeeze something else in there. I have seen someone use the AN fittings and braided hose but the hoses will not be a straight shot from the bowl to the distribution block or fuel log. I'd just leave the stock 5/16" line.

 

[lewtot184]

this is a 3/8" line i put together. that was complicated enough for me. i think Promax makes up a -6 line set-up.

 

[Mark B]

lewtot,
nice job! probably took a while to get it looking right.

 

[lewtot184]

lewtot,
nice job! probably took a while to get it looking right.

thanks. doing a 3/8" line isn't as straight forward as 5/16" due to bend radius differences and limited space. i've done fuel logs also but don't have any pictures. i don't like the braided lines due to expense and they have a somewhat disorganized look to me.

 

[440beep]

Check Promax out, half way down the page.

http://www.promaxcarbs.com/

 

[Albert Spangler]

I did 3/8" line with AN fittings coming out of a 3 port distribution block. It is nowhere near as clean as lewtot's.

 

[Meep-Meep]

Nice work Lew!

 

[tallhair]

Concur, very nice Lew