69 B Body convertable quarter glass removal

[MOPAR MIKES]

How do you remove the quarter glass on a 69 B Body vert ? Hard to see where it is held in and how it comes out ?

 

[Gus chiggins]

Do you have an FSM?

 

[pnora]

I think the hardtop and convert should be close. This video might help you. Quarter Panel Glass Removal

 

[Runner 68]

I think the hardtop and convert should be close. This video might help you. Quarter Panel Glass Removal

Yep. Used that same video myself on my hardtop. Should be pretty damned close.
Those quarter glass regulators can be a bit like a Rubik's cube. That video is helpful.

 

[MOPAR MIKES]

does not show how to remove glass in vid but I can see how the glass is bolted to the trak just cannot see those bolt on this car so may be a bit different ?

 

[Runner 68]

does not show how to remove glass in vid but I can see how the glass is bolted to the trak just cannot see those bolt on this car so may be a bit different ?

Removal is the reverse of the installation. Roll the window up and down until the bolts line up in the access holes on the inner panel.
Unless you're working on a Nova it should be pretty idiot proof.
I doubt the verts are different from the hardtops in this respect but I have been wrong before.

 

[1 Wild R/T]

Well everybody is wrong... The vert has similarities but definitely has differences too... On a hardtop there are two bolts that allow you to unbolt the window while leaving the tracks, guides & regulator in the car... Sure would be nice if that were true on the vert... But it's not.... Everything has to come out & everything is unique to a vert... Even the rollers are slightly different....

It's been over ten years since I did one, so I'm not gonna try to give you a step by step, I can tell you try to not move the in/out adjustments on the guides... Mark the current positions so it's easier to get things lined up when going back together... And take pictures...

The regulator, guides & tracks all have to come out...

 

[Dale Lucy]

I worked mine 3 years ago, and Wild R/T is correct, the video mentioned above is certainly informative, but somewhat useless when working a conv. In addition to taking a lot of pics, I only did one side at a time, and used the intact side as a guide. And yes, everything has to come out.

Dale