833 conversion

[savoy]

Im building a 63 savoy and i ended up with an early style 4 speed with the flange. After doin some info hunting i found that I really dont want to use that style. Is it possible to swap the tail housing to a slip yoke style?

 

[Meep-Meep]

You might be in for a main shaft swap as well - or possibly more. Jaime at Passon Performance should know.

 

[savoy]

Might be more work than what its worth. Ill check with this Jaime @ Passon. Thanks for the tip!

 

[69 Runner]

Yup. You really don't want the ball and trunnion. It would probably be easier to just get another trans than to try and scrounge the parts to modify this one

 

[savoy]

checked into it. requires a new output shaft and tail housing. parts around $300.

 

[kdtjb]

If you want it to look like the real deal keep the B&T, mine works great and I've been using them for 38 years on different cars. If you are going to put some slicks on and go racing, go with the Yoke.