AMD Pan vs Goodmark Question

[SgtLee511]

I have put on a front rail and I have replaced all my inside pans with AMD,with good results, my budget is getting tighter and was wondering about the comparison between a Goodmark Trunk Pan and the AMD trunk pan. Could I get some comments regarding using a Goodmark Pan, Am I loosing anything to go with a Goodmark pan?

 

[Rick Carson]

Some good mark stuff is not bad,but,I have never seen there trunk pans and don't know if they come as one piece.AMD one piece trunk pan is a real sweet piece and probably worth any extra coin it would take.looks like you are leaving no stone unturned on this thing ,why take a chance now?Looks like a 68/9 383 auto on the wheel,super bee or road runner to me. am I right?

 

[SgtLee511]

Some good mark stuff is not bad,but,I have never seen there trunk pans and don't know if they come as one piece.AMD one piece trunk pan is a real sweet piece and probably worth any extra coin it would take.looks like you are leaving no stone unturned on this thing ,why take a chance now?Looks like a 68/9 383 auto on the wheel,super bee or road runner to me. am I right?

69 383 Roadrunner T7 Bronze, your probably right, staying with I know best

 

[Rick Carson]

Sweet ride,best of luck!

 

[jason lewis]

Good mark makes a full trunk pan.I put one in my 68 runner this summer.Now I didn't use the whole thing,but I would say that it is close to AMD on quality.I say that because I did a floorpan in a 64 dodge post car also,that was AMD.Happy with both.

 

[SgtLee511]

Thanks for the reply

 

[YY1]

Some goodmark stuff is as good as amd.

They also make some good quality stuff stuff that amd doesn't.

 

[SgtLee511]

I'm looking at this Goodmark trunk pan being 40.00 cheaper on ebay thru Tamaraz

 

[morrow_jacob]

I'm looking at this Goodmark trunk pan being 40.00 cheaper on ebay thru Tamaraz

I have a goodmark trunk pan for my 68 that I bought from Tamraz a while back, if you'd like. I'm over in Granbury. Havent installed it yet, Looks fine, but I will buy AMD from now on.

How far are you from Dallas? There is a guy who sells lots of AMD out of a warehouse and I bought my full front pan from him at a pretty good discount. Maybe give him a ring and see if it fits your budget.

Personally, I'm going to buy from him from now on. If these big pieces get shipped to my door and they have a huge dent in the side, I may be on the hook for returning it. And even if Im not out of pocket, I'm certainly getting a huge headache and a lot of trouble returning such a huge piece.

If the piece is busted at his warehouse, then he gets to send it back.... I like that much better!

Here is one of his posts... https://dallas.craigslist.org/ndf/ptd/5807036707.html

 

[SgtLee511]

I have a goodmark trunk pan for my 68 that I bought from Tamraz a while back, if you'd like. I'm over in Granbury. Havent installed it yet, Looks fine, but I will buy AMD from now on.

How far are you from Dallas? There is a guy who sells lots of AMD out of a warehouse and I bought my full front pan from him at a pretty good discount. Maybe give him a ring and see if it fits your budget.

Personally, I'm going to buy from him from now on. If these big pieces get shipped to my door and they have a huge dent in the side, I may be on the hook for returning it. And even if Im not out of pocket, I'm certainly getting a huge headache and a lot of trouble returning such a huge piece.

If the piece is busted at his warehouse, then he gets to send it back.... I like that much better!

Here is one of his posts... https://dallas.craigslist.org/ndf/ptd/5807036707.html

Im south of Texarkana about 2hrs from the Big D

 

[national]

Elite Custom Body & Paint
9121 Berry ave.
Jacksonville, FL 32211
(904) 592-6666
He is an AMD dealer,probably Goodmark also
Wont beat his prices or service,Ive ordered alot from him,Very good guy
I would use Goodmark if I had it all over to do again I think,I have used several AMD panels,floor & trunk pans fit Ok,Body panels fit good but lots of metal work to straighten them out

 

[flypaper]

Some goodmark stuff is as good as amd.

They also make some good quality stuff stuff that amd doesn't.

i have found some goodmark that is better then amd..

 

[morrow_jacob]

I have had both goodmark and amd full front pans in my garage and can vouche at least for the AMD pan being far superior

 

[bigbertha72]

Anyone got the contact for the amd guy in Dallas?

 

[SgtLee511]

Anyone got the contact for the amd guy in Dallas?

Go To Craigslist Dallas Ft Worth he's got the metal adds on Criagslist

 

[morrow_jacob]

Anyone got the contact for the amd guy in Dallas?

His name is Ralph, Ive bought through him several times now, great guy, he is willing to be at his shipping center whenever you are able to pick it up even on Sundays.

And its freakin awesome to check for damage before picking it up so you dont have to go through the hassel of returning it.

His number is (469) 525-0208

 

[bigbertha72]

Thanks for the contact info