Any differences between a 68 & 69 RR dash?

[NGC414]

The previous owner of my 68 RR cut the factory dash for aftermarket guages. He did a nice job, but I prefer stock original style. I found a dash from a 69RR locally. I was wondering if it would work if I swap the pad.
I am also courious if there are any issues tranfering the vin tag on the new dash.
Thanks

 

[MoparBill]

You'll have to buy the proper 'rosette' rivets for the VIN tag. A/C frames are different than non-A/C.

 

[hunt2elk]

ECS sells the correct VIN plate rivets. I think the ignition switch hole is a slightly different size between the 2 years, but can be made to work.

 

[Basket case]

yes, the '69 has the bigger ignition switch. aside from the ac/non ac dash, the metal frame is the same.

 

[themechanic]

The previous owner of my 68 RR cut the factory dash for aftermarket guages. He did a nice job, but I prefer stock original style. I found a dash from a 69RR locally. I was wondering if it would work if I swap the pad.
I am also courious if there are any issues tranfering the vin tag on the new dash.
Thanks

Here's the run down on the instrument panel differences.

http://www.performancecargraphics.com/Dash_Stuff/B-body_Standard_ID.htm

 

[NGC414]

Great info! Thanks again for the help

 

[AngrySatellite]

Make sure you check your wiring....i have a 69 sport satellite....had to replace due to a fire under dash....rplaced it with a 68 dash....difference is now my parking lots dont work when i put my headlights on full. They do work when i have the lights switch halfway on. Guess thats the lights setup in 68's. Annoying otherwise everything should be the same.

 

[Propwash]

Heater controls are different and the '69 dash pad is molded to conform to the heater controls.

 

[Basket case]

forgot about the heater control. I always put a '69/'70 style in mine since I like the light. started doing that with my '68 Charger.