Anyone making custom pulleys?

[HT413]

I *might* be in the market for a custom offset crank pulley in the near future and was wondering if anyone here has the tooling to do it.

My motor is a truck motor which has a balancer that is 7/8" thicker than normal, thus pushing the crank pulley 7/8" out toward the radiator. I would like to move away from my current Gilmer belt drive / flex fan setup and move toward a stock setup. one option I am considering is a crank pulley that is 7/8" less deep, which will bring everything back into alignment.

Anyone interested? I'm not ready to pull the trigger yet, but may in the next couple of weeks depending on how my next order of parts lines up.

 

[64 Post]

DMI pulley sold through Mancini, then mill to correct thickness. This pulley also works without machining and lines up with the stock water pump if you’re running an ATI 3-ring balancer.

 

[HT413]

Hey, thanks, 64. I called DMI and they set em up with exactly what i need.

 

[64 Post]

Glad it worked out for you.