Can you “re-key” an ignition tumbler?

[Hosehead]

Pardon me if this is a dumb question but I was just curious.
Let’s say you had a set of door locks with a working key.
Can you change the ignition tumbler to work with the key from the doors?
I know you can change door locks, just curious if the ignition can be altered as well.
Thanks all.

 

[68gtxman]

Pardon me if this is a dumb question but I was just curious.
Let’s say you had a set of door locks with a working key.
Can you change the ignition tumbler to work with the key from the doors?
I know you can change door locks, just curious if the ignition can be altered as well.
Thanks all.

Yes, by a locksmith.

 

[cosgig]

I believe you can, but I’m not sure about the column key switches. I know the in dash switches can. A little story….

When I was younger, we would borrow my buddies brothers dodge sportsman van and take it to parties. We picked up this boisterous young chick who insisted that she hold the key because she thought that we would leave her with no ride home. She lost the key, so we emptied out the tumblers of the in dash key switch and just used another Chrysler key we had. We gave that key to his brother and he was never the wiser that now any key would work in the ignition. So yea, it can be done.

 

[Tinker67]

Sure can, My ignition key also opens trunk.

 

[Hosehead]

Sweet. Thanks guys. Now to find a locksmith!
BTW the car in question is a 65 Belvedere.

 

[LowBikeMike]

You probably don't need a locksmith. It's pretty simple.

 

[Hosehead]

I’m guessing YouTube is my friend on this one.
Now I have something to research over the holiday.

 

[haywire 440]

I seem to remember there is a member on this site that responded to a similar question that they could accomplish this but the lock(s) needed to be mailed to them.

Sorry for not having a name.

 

[Longknife]

The dealers had kit that had all the different tumblers in it and a tool that would measure the points(?) on the keys. They could then match up tumblers to the key.

 

[j-c-c-62]

I believe you can, but I’m not sure about the column key switches. I know the in dash switches can. A little story….

When I was younger, we would borrow my buddies brothers dodge sportsman van and take it to parties. We picked up this boisterous young chick who insisted that she hold the key because she thought that we would leave her with no ride home. She lost the key, so we emptied out the tumblers of the in dash key switch and just used another Chrysler key we had. We gave that key to his brother and he was never the wiser that now any key would work in the ignition. So yea, it can be done.

So, did you leave her?
No Key no ride?

 

[dadsbee]

Your certainly can...

 

[WileE]

Your certainly can...
View attachment 1764317

 

[MWbirdLOVER70]

View attachment 1764329

Hehehe

 

[threewood]

Your certainly can...
View attachment 1764317View attachment 1764318View attachment 1764319View attachment 1764320

You are going to be everybody's best friend!! Haha

Re-keying them is easy, but you have to have a fair amount of pins to pick and choose from (like Dad's kit).

I've done a couple lock cylinders, some only have 3 lock pins as that was all I could get to work.

 

[dadsbee]

I think @moparsaver has a kit left in his massive stock of NOS/NORS

 

[Jerry Hall]

I think @moparsaver has a kit left in his massive stock of NOS/NORS

Maybe he has some left, best 50 bucks I've spent in a while.

 

[Hosehead]

Are these kits readily available? I’ve never seen one until today.

 

[dadsbee]

Are these kits readily available? I’ve never seen one until today.

NO, but I showed you who to contact in post #15.

 

[cosgig]

So, did you leave her?
No Key no ride?

Nope, one of us had our way with her, but she was one crazy wildcat. And that’s all I can say here!

 

[moparsaver]

i might have 1 more kit, will look this weekend.