Clutch bell crank bracket location on a 69 Charger

[Stucat]

Looking on converting my 69 Charger to a 4 speed. Have all the parts, but need info on locating the clutch bell crank bracket. The engine is not installed so I have plenty of room to work. i found the bracket, but no measurements on location included. Thanks for all the help.






looking on converting

 

[69hemibeep]

Looking on converting my 69 Charger to a 4 speed. Have all the parts, but need info on locating the clutch bell crank bracket. The engine is not installed so I have plenty of room to work. i found the bracket, but no measurements on location included. Thanks for all the help.






looking on converting

Looking at the inner fender and frame at the access hole there is a notch in the frame that a new weld in bracket tab will fall into if the frame hasn't been modified. Iv'e done a couple of them.

 

[radical rob]

Go hydraulic and forget trying to weld to the frame and hope it all lines up even with the bellhousing

 

[Bird 426]

They have their issues too, plus the price.