Collection of Parts for 392 Swap

[PistolGrip6]

Front suspension completely installed. Front wheels are on and it’s a roller for the first time since August 2023.

 

[PistolGrip6]

Progress has been slow but steady.

Sonnax TR6060 trans output adapter installed.

Got the proper measurements for the driveshaft and then ordered a steel slip yoke style with Spicer1350
U-joints.

 

[PistolGrip6]

Next was installing the flaming river steering column to mock up steering shafts from the column to the rack. Made up my own firewall cover and column retainer. Drilled and tapped the shafts on the flat side so the
u-joints are super secure. Had some doubts about using just the set screws and jam nuts. Still spot faced the round side of the shafts for the set screws. Everything red loctited.

New hydraulic clutch pedal assembly and USCT DBW pedal mount.

 

[PistolGrip6]

Installed the TTI 2.5” X-pipe exhaust system and welded on the tips. Used Evil Energy exhaust clamps. Also fab’d up an extra bracket near the back to make sure the over axel pipes stayed in place.