Cylinder Head Exhaust Stud Repair
- Thread starter PurpleBeeper
- Start date
- Local time
- 7:23 PM
- Joined
- Aug 5, 2011
- Messages
- 3,801
- Reaction score
- 5,608
- Location
- Lisle, HELLinois!
Yeah, you're right! I was thinking that they were 5/16". If the studs are 3/8", then a 10mm
metric tap would be the magic bullet. That would be 0.394", which is 0.019 bigger than 3/8".
I got cornfused with Curious Yellow's post about the thread insert. Thanks!
metric tap would be the magic bullet. That would be 0.394", which is 0.019 bigger than 3/8".
I got cornfused with Curious Yellow's post about the thread insert. Thanks!
Similar threads
