• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Dash is in and letters on

ram250098

Well-Known Member
Local time
8:14 AM
Joined
Jul 4, 2009
Messages
757
Reaction score
147
Location
Cookstown Ontario
I was after a cracked up rallye dash that I could butcher without feeling guilty LOL. I loaded it with some Auto Meter Ultra Lites and thought I would post a pic if anyone else has an idea to go the same route.
AL
ps Thanks for the Plymouth letters from Challenger Gary

march runner 006.jpg


march runner 005.jpg
 
AL, your going to have to bring that Bad Boy down to Tottenham for a little show and tell!
 
Not bad,I did the same thing last year but I hand sanded all the wood grain smooth and painted the cluster gray then I extended the gauge clusters holes and then mounted Autometer sport comp gauges..If I ever remember to get a new batt for my Camera I'll post some pic's.
 
Two pic's I found on the net awhile ago,thought every one might want to have a look.

mopp_1003_03_o+1974_plymouth_road_runner+interior.jpg
1970chargerinteriorjr0.jpg

mopp_1003_03_o+1974_plymouth_road_runner+interior.jpg


1970chargerinteriorjr0.jpg
 
That second pic there sundance looks amazing, nice interior REALLY nice.
My old linear dash was toast, nothing worked which is why I opted for the rallye swap. I found a cut dash for $50 and had bought all the gauges for under $200 brand new..couldn't go wrong. I had done quite abit to it over the winter, and now I am done till next winter, if I still have it LOL.
AL
 
This is the Cluster I'm working on now..This is an old pic of when I first started to customize it.See how I sanded all the wood grain off for a smooth clean look...Dont worrie this was an old cracked and hacked cluster when I got it ;)
R.R cluster 004.jpg

R.R cluster 004.jpg
 
72chrgr

Here'e one I just finished--started with junk ralley that had radio cut out. Mounted radio and relocated light and wiper switches to metal dash frame. Made a clay mold of small pod did a resin casting and mounted it in old light/ wiper switch locations. used filler primer and wet sanded to get rid of alot of the wood grain. Rewired entire dash- can now be removed without disconnecting radio or light and wiper switches-- installed "GLOW-SHIFT" fuel, water temp., oil pres., tach. and spedo.

spring 2010 015.jpg


spring 2010 018.jpg


spring 2010 031.jpg
 
Awesome!!! I love modern updates on older cars... especially when they are done very well like these, so it looks like it could have been original.

Good job guys...

I work with E.L. and have been planning to convert my 68 Charger dash to being back-lit with E.L. like my 06 Charger for a very long time... still one of my "to do" items.
 
Thanks for the interest. Here are a few night shots--a little blurred but you get the idea

spring 2010 047II.JPG


spring 2010 049II.JPG


spring 2010 051II.JPG
 
Auto Transport Service
Back
Top