Did 1966 hemi cars air cleaner

[gtx6970]

Bought one off Ebay and installed. I didnt think they had one, so removed it a while back ( was wrong format anyway ) All is better now.

Im 99% sure it shouldnt have the 426 decal on top, But I like it. So it stays

If anyone has a spare , or a source for the plastic cap for the breather tube, Im all ears

Thanks.

 

[QuickBpBp]

Bought one off Ebay and installed. I didnt think they had one, so removed it a while back ( was wrong format anyway ) All is better now.

Im 99% sure it shouldnt have the 426 decal on top, But I like it. So it stays

If anyone has a spare , or a source for the plastic cap for the breather tube, Im all ears

Thanks.

View attachment 1631263

I am not familiar with plastic caps but they do make rubber end caps for hose barbs.. Something like this would work if you just want to cap it.

5/8" Water Pump Heater Core Rubber Hose Caps Blockoff Plugs 4Pcs | eBay

 

[gtx6970]

I am not familiar with plastic caps but they do make rubber end caps for hose barbs.. Something like this would work if you just want to cap it.

5/8" Water Pump Heater Core Rubber Hose Caps Blockoff Plugs 4Pcs | eBay

Mine has the later style with hose and breather. So, its fine for the time being.

BUT, only CA cars got the hose style in 1966, which mine is not. And all 67s got the hose and coordinating valve cover breather

So just looking to come up with the correct cap if I can. If not. It will stay as is

 

[64BEL]

My air cleaner is original, too. No 426 decal from the factory, as seen in the second pic in post #14.
The plastic cap is hard to find, according to Nick on this website. Nick's Garage - Air Cleaner Identification There are pics of my air cleaner there. My original cap is hard plastic.

 

[426s martin]

99% sure this is the right one-----also no 426 on the top, but i like it so its has one

 

[autoxcuda]

Mine.

I also have 426 decal on lid top. Are you guys saying it should be blank?

SPD April 27, 1966

 

[64BEL]

Mine.

I also have 426 decal on lid top. Are you guys saying it should be blank?

View attachment 1632848

View attachment 1632849

Some came with them and some didn't. I like it, but I haven't added one since mine didn't come with it. Mostly since I have that picture from when it was new.

 

[Fran Blacker]

Think mine didn't come with one, the original owner made one mounted poorly.

 

[Ceedawg]

This is the best pic I can come up with of mine right now. I threw in the second one to show what the engine looked like when the car was new.

View attachment 1629427

View attachment 1629428

Also has the correct thermostat housing for 66. When was your car built? Mine was Jan 66.

 

[gtx6970]

Also has the correct thermostat housing for 66. When was your car built? Mine was Jan 66.

SBD on my car is April 1966.
Assy date on the motor is March 1966.

Original Thermostat hsg as far as I know

Previous owner added the 426 decal as far as I know of. And I have no plans to remove it

 

[Ceedawg]

SBD on my car is April 1966.
Assy date on the motor is March 1966.

Original Thermostat hsg as far as I know

Previous owner added the 426 decal as far as I know of. And I have no plans to remove it

SBD on my car is April 1966.
Assy date on the motor is March 1966.

Original Thermostat hsg as far as I know

Previous owner added the 426 decal as far as I know of. And I have no plans to remove it

Since yours didn’t come with any I won

SBD on my car is April 1966.
Assy date on the motor is March 1966.

Original Thermostat hsg as far as I know

Previous owner added the 426 decal as far as I know of. And I have no plans to remove it

I won’t put any on mine now, thanks

 

[64BEL]

For mine, the engine assembly date was April 20, 1966, SO Date July 20th, Shipped Date September 15th.