Disc Brake Conversion Offset Change?

[vintagetin]

Is there anyone that has replaced their front drums with this disc brake kit?
Can you please share if, and how much it changes the front offset?
https://www.summitracing.com/parts/rsd-mdc62sd

Part Number: MDC62SD

Thanks!

 

[cudak888]

I just did the conversion (still some details to work out, but it's on the ground with it) using factory equivalents to the reproduction Right Stuff Detailing parts (F/M/J spindles + 11.75" brake hardware).

Mind you, I didn't make any formal measurements, but I'm quite certain the offset remained the same as it was before - I see no discernible difference in the wheel's distance/position relative to the frame.

-Kurt

 

[vintagetin]

I just did the conversion (still some details to work out, but it's on the ground with it) using factory equivalents to the reproduction Right Stuff Detailing parts (F/M/J spindles + 11.75" brake hardware).

Mind you, I didn't make any formal measurements, but I'm quite certain the offset remained the same as it was before - I see no discernible difference in the wheel's distance/position relative to the frame.

-Kurt

Thanks Kurt. If it's not enough to tell the difference, then it's not enough to bother me.
Good info.