Driveshaft Interchangeability Question.

[bob32268]

I have a 69 Charger with 727 trans and 8 3/4 rear, what other MOPAR driveshafts will interchange with this? I'm fairly certain that the GTX and RR and Superbee will, but what about the Coronets and Satellites, also what years
of these cars will interchange?
Tks,
Bob32268

 

[Dutchrebuild]

Plymouth b body's have a 1" shorter wheel base, so you can eliminate thos. 67-70 dodge b body with 8.75 and 727 should be roughly the same...some years had the heavy ring cast in on tranny side

 

[Fran Blacker]

Plymouth 8.75" d shafts 1" shorter than Dodge d shaft.

 

[bob32268]

Plymouth b body's have a 1" shorter wheel base, so you can eliminate thos. 67-70 dodge b body with 8.75 and 727 should be roughly the same...some years had the heavy ring cast in on tranny side

Thanks for the info, I wasn't aware of this.
Bob32268

 

[Bird 426]

Lotta people don't realize or know that the wheel bases were different between several models of Dodge and Plymouth.

 

[493 Mike]

Dodges were considered more upscale than Plymouths and priced accordingly.
Mike

 

[Don Frelier]

I have a local friend that builds them.
PM me if you're interested and I can get you some contact information.