Eng pics !

[shag766]

here is one of mine. not the best shot but learning. i will have
e/t's this summer after 2x4 goes on. maybe one before and one
after install. interesting thought.:headbang:

 

[1stBxMopar]

I'll play too:icon_eyes:These are some old ones:icon_eyes:

Nice to see Lou Vignogna has not been forgotten -R.I.P.

 

[696pack]

My 392

Is it just the picture or is that belt way out of alignment???

 

[moparpoor]

Here's one of my junks.Just a little pump gas 440.The last one is it hanging on the chain changing freeze plugs.Here's to my buddy that drained the radiator for me

 

[HEMI-ITIS]

Nice to see Lou Vignogna has not been forgotten -R.I.P.

Louie made me feel like family.I drove up from the Island whenever I could to buy them coffe when I built the blower engine:

 

[lewtot184]

nice pictures folks!

 

[383man]

"Moparpoor "your eng reminds me of mine. I use the same Indy valley plate and I use Indy EZ heads with Hughes 1.6 rockers and hold downs. What Indy heads are they you are using ? Ron

 

[moparpoor]

Those are full cnc maxwedge port and hand touch up with 1.5 T&D rockers with port matched intake and full roller valvetrain.

 

[66plysat]

Question for Bones Jackson

Could you tell me what color your car is painted (I know it's blue). Do you know the number, brand etc.....thanks

 

[383man]

Those are full cnc maxwedge port and hand touch up with 1.5 T&D rockers with port matched intake and full roller valvetrain.

Are they the -1 Indy heads ? The rocker hardware looks just like the Hughes parts I use. Nice looking setup. Ron

 

[black64]

Is it just the picture or is that belt way out of alignment???

Picture, no problem with the belt alignment.

 

[Budnicks]

Ardun

Here's one, a Blown Ardun Headed Hemi Flathead conversion, it's not mine I found it on another site, thought you guys would like it...

 

[moparpoor]

Are they the -1 Indy heads ? The rocker hardware looks just like the Hughes parts I use. Nice looking setup. Ron

No,they are ez heads.I am getting ready to build a low deck for my sons car same setup.Just alot more power.The heads that are on this motor are really to big for the ci and rpm range.You really don't know until you experiment.

 

[1stBxMopar]

old school

 

[cam383]

this is all I got

 

[Budnicks]

Cool

old school

That is an old school Wieand Tunnel Ram, but very cool look though... I had one of those things back in the late 70's I think it was...

 

[dla4567]

My old bus engine.

 

[moparpoor]

This is the low deck I am geting ready to build for my oldest son.My oldest turns 16 tomorow,so dad has to get to work.The build is a 400 block 511 stroker,cr 13 or 14 to 1,maybe victor heads?,multi carb or single?,aluminum mains and girdle,roller valvetrain and cam.Some details to work out,their will be plenty:argue: between us as usual.HP range around 800hp in a 3200# 68 dart.

 

[Red63440]

Just my 383.....

 

[HEMI-ITIS]

Red,that sure looks purty:headbang: