Engine start stand

[Anthony]

Hi, I figured I would share some photos of my engine start stand I built over the weekend. If anything was looking ideas, this was built with scrapes. I am into it for about $40

 

[Cranky]

Should work.....but big blocks have a lot of torque so don't spool one up too quickly or it might roll over. Been there done that!!

 

[cryplydog]

Is that just thin wall tubing?

 

[Anthony]

Is that just thin wall tubing?

Looks like that, is a little thicker. Came from an old boat garage/cover. This stuff was used for the roof joists