Front disc brake conversion kits

[andyf]

On my last project I used a Viper kit. Looks great, works great and fit nice.

 

[1STMP]

What do you mean exactly by "best?" Price? Stopping power? Factory setup? Aftermarket? Daily driving ? Weekend auto cross? Wheel fit selection ?
Here is a standard go to from long ago, using all Mopar factory parts.

DISC-O-TECH: Stop on a dime from Mopar Action and Rick Ehrenberg

DISC-O-TECH: Stop on a dime from Mopar Action and Rick Ehrenberg

www.allpar.com

All Rick is saying, that if
you are willing to take the
time, and enjoy the hunt,
that you're not tied down
to using ready made kits
available from trusted
vendors. Evidently, they've
done the homework, and
offer kits available more so
for those that want a quick
and easy conversion.
What the poster is
suggesting is that you can
piece together a braking
system, using available
junk yard parts at a fraction
of the price of ready made
kits. In no way am I knocking
Dr. Diff....
They're in the business of
making the conversions
for a more modern driving
experience. They've done
an exceptional job at
making our lives "easier".

 

[andyf]

All Rick is saying, that if
you are willing to take the
time, and enjoy the hunt,
that you're not tied down
to using ready made kits
available from trusted
vendors. Evidently, they've
done the homework, and
offer kits available more so
for those that want a quick
and easy conversion.
What the poster is
suggesting is that you can
piece together a braking
system, using available
junk yard parts at a fraction
of the price of ready made
kits. In no way am I knocking
Dr. Diff....
They're in the business of
making the conversions
for a more modern driving
experience. They've done
an exceptional job at
making our lives "easier".

The discotech article was great info 30 years ago when it first came out but these days it isn't super helpful since the wrecking yards have been picked over for year. Back in the 1990 to 2005 era I would load up my tool box on Saturday and go to the wrecking yard to pull disc brakes. I used to get one or two sets of A body or FMJ knuckles each trip as well as a set of 11.75 rotors and caliper adapters. I had a nice little side gig selling those parts to guys in the midwest and northeast. But is long gone which is why Doctor Diff invested money to have reproduction parts made.

 

[Some Car Guy]

I dont think you can even get the good pin type adapters anyplace. I got a set out of a junkyard in the middle of nowhere about 1999 and never saw a set after that. Then if you found them, I’m not sure if you can get the pin type calipers either.

 

[andyf]

I dont think you can even get the good pin type adapters anyplace. I got a set out of a junkyard in the middle of nowhere about 1999 and never saw a set after that. Then if you found them, I’m not sure if you can get the pin type calipers either.

Yeah the pin type dried up a long time ago. The factory switched to sliders and then so did the replacement mfgs.

 

[Timmayy]

It looks like the Dr Diff kit is very reasonable. I plan on converting my 65 Belvedere wagon in the near future. Probably a winter project. Are the pads/rotors/calipers a Dr Diff only part or are they repops of factory pieces? Just wondering when it comes time for replacements.

 

[MoparMikeo]

All Rick is saying, that if
you are willing to take the
time, and enjoy the hunt,
that you're not tied down
to using ready made kits
available from trusted
vendors. Evidently, they've
done the homework, and
offer kits available more so
for those that want a quick
and easy conversion.
What the poster is
suggesting is that you can
piece together a braking
system, using available
junk yard parts at a fraction
of the price of ready made
kits. In no way am I knocking
Dr. Diff....
They're in the business of
making the conversions
for a more modern driving
experience. They've done
an exceptional job at
making our lives "easier".

This was written LONG before all of the Dr. Diff, etc kits were even thought of. I grabbed all of this "stuff" way back then, a set for our 69 Coronet, and one for the 68 B'cuda. Life happened, time to start working on them while I can!

 

[70runner]

Finding an 70s A body or even FMJ for knuckles and caliper adapters in today's boneyards is nearly impossible. Collected many of these for several conversions during early 90s boneyard trips when 70s A bodies were plentiful. You could still get plenty of pin type Looking to convert daughters 69 Charger RT power drum to front disk. Probably go with Dr Diff. Hoping to retain stock appearance.

 

[snakeoil24]

What do you mean exactly by "best?" Price? Stopping power? Factory setup? Aftermarket? Daily driving ? Weekend auto cross? Wheel fit selection ?
Here is a standard go to from long ago, using all Mopar factory parts.

http://[URL]https://www.allpar.com/d3/history/mopar/brakes/disc-main.html

[/URL]

Also I agree a very good choice

 

[Ed Brock]

What do you mean exactly by "best?" Price? Stopping power? Factory setup? Aftermarket? Daily driving ? Weekend auto cross? Wheel fit selection ?
Here is a standard go to from long ago, using all Mopar factory parts.

http://[URL]https://www.allpar.com/d3/history/mopar/brakes/disc-main.html

[/URL]

Ah yes. The Mopar Action disc Co article. Very good info.