Getting ready to Instal 440 disguised as a Max Wedge in 63 B-body

[super-bee_ski]

Question is:
Is this the correct Schumacher Kit for the 440 in the 63 B-body?
Schumacher says it is, has anyone used this Kit?
Thanks,
Schumacher Creative Services

'62-65 B-Body Big Block Swap or Replacement Kit​

Regular price$189.00

 

[pigpen]

there is also these mounts:

Early B Body 1962-1965-440 Source

they also state that they will work in a small block car, but can't attest to how they are, just ordered the mounts yesterday for my project.

 

[super-bee_ski]

Thanks Pigpen!
Looking into it as I am only 50 miles from 440 Source headquarters!
I almost think they are not for 40s, but I am researching it!

 

[PRND21]

These are the rights and lefts for an early B Body. Pictures are from Kryslerkid I believe.

 

[khryslerkid]

Question is:
Is this the correct Schumacher Kit for the 440 in the 63 B-body?
Schumacher says it is, has anyone used this Kit?
Thanks,
Schumacher Creative Services

'62-65 B-Body Big Block Swap or Replacement Kit​

Regular price$189.00

What engine did your car originally have. Mine had a 361 and the 440 bolted right in.

 

[super-bee_ski]

These are the rights and lefts for an early B Body. Pictures are from Kryslerkid I believe.View attachment 1451247View attachment 1451253

Thanks for this info!

 

[super-bee_ski]

What engine did your car originally have. Mine had a 361 and the 440 bolted right in.

Mine was a 318 Poly.

 

[khryslerkid]

Mine was a 318 Poly.

So if I'm correct you would need the big block K frame or the kit to swap. Refresh my memory.

 

[pigpen]

Everything I've read states the k frame is the same 63+ weather it's bb or sb but it is the internet so....
Mine was a small block and has a bb in it, I just got new rubbers as a new motor is going in and I didn't change the k frame

 

[PRND21]

K frame is the same for A, B, and RB engines in the early Bs.

 

[Dodge 330]

This is correct. You might want to get the engine tie down for the drivers side as well as those rubber mounts are prone to tearing.

 

[super-bee_ski]

Yes, the 6 Cylinder and the 318 K-frames will not accommodate the 361, 383, 440s...
So Schumacher makes the adaption kit.
It is "on the way"

 

[Dodge 330]

Yes, the 6 Cylinder and the 318 K-frames will not accommodate the 361, 383, 440s...
So Schumacher makes the adaption kit.
It is "on the way"

All the v-8's from '63-'65 use the same K. Only slant 6 and Hemi K's are different.

 

[super-bee_ski]

Thanks Dodge 330