Gutter Seal Suggestions

[Moparfiend]

What do you all suggest I use for the roof gutter seal? Should I use the same seam sealer I used in the trunk area or is there something different I should use?

 

[1 Wild R/T]

In the past I've used a 3M self leveling seam sealer but it requires a special application gun... I was able to borrow one.... Eastwood offers a two part product that uses a standard gun....

Amazon product ASIN B003JURUDS
I've never used it but it sounds like a good option....

 

[zyzzyx]

I use 3M Urethane seam sealer. 08367 is Black in color, but it comes in a beige. You can get it locally at NAPA
and it uses a regular caulking gun. 08365 is beige.

 

[threewood]

I used SEM 39387 self leveling seam sealer on my GTX. Works great. It requires a special gun but I can send you my gun to use if you go this route.

 

[1 Wild R/T]

I used SEM 39387 self leveling seam sealer on my GTX. Works great. It requires a special gun but I can send you my gun to use if you go this route.
View attachment 1446690

View attachment 1446691

Best answer & a very kind offer....

 

[Moparfiend]

I used SEM 39387 self leveling seam sealer on my GTX. Works great. It requires a special gun but I can send you my gun to use if you go this route.
View attachment 1446690

View attachment 1446691

Thank you Marc! (Sorry if I messed up your name?). I got some that does not require a special gun!

 

[threewood]

Good deal!

 

[Moparfiend]

Test panel one. 2ft x 2ft over white. Just a quick spray out to look at the color. Wanda “Tangerine Orange” base 3 coats. This is very close to the Chrysler 999 special order orange.
Covered with some leftover clear 2 coats I had laying around for a few years lol. A little orange peel, trash and solvent pop. So far I love this color. Will do one more color sample before my final choice. Plan on using SPI clear with it.

 

[myfeather626]

I use 3M Urethane seam sealer. 08367 is Black in color, but it comes in a beige. You can get it locally at NAPA
and it uses a regular caulking gun. 08365 is beige.View attachment 1446683

I did use that sealer on the beige. I have none on my Challenger!

 

[myfeather626]

Test panel one. 2ft x 2ft over white. Just a quick spray out to look at the color. Wanda “Tangerine Orange” base 3 coats. This is very close to the Chrysler 999 special order orange.
Covered with some leftover clear 2 coats I had laying around for a few years lol. A little orange peel, trash and solvent pop. So far I love this color. Will do one more color sample before my final choice. Plan on using SPI clear with it.

View attachment 1447581

View attachment 1447584

Nice Color!

 

[Moparfiend]

Nice Color!

Thanks it came out very well!