Reamzer
Well-Known Member
Looking and searching for an aftermarket aluminum 26" radiator for my 440 big block coronet. Can't find one that fit. Really struggling and confused. Anyone care to help me out? 3 or 4 row, either works! Thanks.
HELP! 1967 coronet radiator question
- Thread starter Reamzer
- Start date
1967coronet440
Well-Known Member
Is it a factor big block car? This is who I'm using for my build.
http://www.speedcooling.com/home.php
Reamzer
Well-Known Member
Factory 383, 440 swapped.
1967coronet440
Well-Known Member
Did it come with a 22" or 26" from the factory? Only way I can see not being able to find one that "fits" is if you have a 22" core support and you're trying to put a 26" in there. Even then it could fit with modification.
Reamzer
Well-Known Member
Has a 26" factory on it now, just had problems. The inlet is on passenger side and outlet on drivers.
1967coronet440
Well-Known Member
Reamzer
Well-Known Member
That's claiming to be a two row. Wouldn't a 3 row cool better?
1967coronet440
Well-Known Member
Depends on who you ask, what kind of power are you putting out?
Reamzer
Well-Known Member
Unsure on power.. Low comp block, mild cam, 750 carb, long tubed headers, exhaust. Just always had heating issues so trying to cool as best as possible!
1967coronet440
Well-Known Member
2 row with 1" tubes and a fan/shroud will cool that just fine.
Reamzer
Well-Known Member
terzmo
Well-Known Member
Champion direct fit...cheapest and best warranty/bang for the buck...I have bought at least 4 over the years and they never disappointed me
Reamzer
Well-Known Member
Can you link me to an exact fit radiator? I can't find a 3-4 row radiator that will fit my car with the inlet on passenger and drivers side outlet.
terzmo
Well-Known Member
e-bay..search champion rad or champion coronet radiator.....
Reamzer
Well-Known Member
I have, nothing says it will fit.. Trust me. I've been all over.
terzmo
Well-Known Member
what year coronet..what engine....22 or 26 inch rad ?..auto or manual trans
Reamzer
Well-Known Member
1967, big block 440, auto trans, 26. The only one they sell is a 2 row that fits.
terzmo
Well-Known Member
I'll look BUT if like the last 3 I bought...the 2 row are two...one inch tubes which is the equivalent of a regular 4 row copper rad...and they cooled my 498 strokers fine..plus the current 472 hemi I have
terzmo
Well-Known Member
http://www.ebay.com/itm/4-Row-Alumi...ash=item25ca8da15c:g:6PQAAOSw1-RUY~Mw&vxp=mtr
4 row...26 inch...fits 67 coronet...easy find
Reamzer
Well-Known Member
I called Champion, the 3 row will fit. Thanks.
Similar threads
