Holley double pumper fuel lines for Mopar

[erickson]

Years ago I bought a Holley double pumper fuel lines that looks correct for a 440
does anybody make them now? They kind of look like fuel lines for a hemi
Thanks

 

[Canadian1968]

Not sure what you mean ? If your talking about fuel line that connects directly to the bowls on the càrb. Those are carb specific ( 4150 or 4160 usually ) Or are you talking about the line that comes from the pump all the way to the carb ? I don't know of any pre bent lines from the pump directly to both bowls of a holly DP

There are tons of different styles , hardlines, braided flex, combination ect. But they are made for the carburetor not the motor.

 

[erickson]

4150 lines from the carburetor towards the distributor. They were made to under distributor to the fuel filter they were made to look stock

 

[Canadian1968]

Hmmm. You bought these from a store ? Or a swap meet? Sounds like maybe someone had custom bent themselves..... here is a picture of mine..... doesn't go under the distributor. There isn't enough room for that.

 

[Black_Sheep]

It’s not that difficult to make one…

 

[Canadian1968]

This is what I think he is talking about. Something someone has made.

 

[erickson]

I bought a few sets of them from a guy that was making them around 30 years ago. I will make my own
Putting a 383 stroker in my 1970 roadrunner convertible. Trying to make it look stock

Thanks

 

[Rick62]

Many different vendors sell the Corvette L88 parts. I've used these before. I've never had much luck flaring tubing. These are close:

67-69 L88 Fuel Pump to Carburetor Line w/ Y Block

67-69 L88 Fuel Pump to Carburetor Line w/ Y Block

www.zip-corvette.com

 

[erickson]

Thanks

 

[Black_Sheep]

66-74 Mopar B-Body, Holley Dual Feed Set; Steel

Pump to Carburetor Fuel Line For 66-74 Mopar B-Body Holley Dual Feed Set Steel. Our Pump to Carburetor Fuel lines connect the fuel pump on the front of the engine to the carburetor. All lines come Pre-Bent and flared with the correct threaded fittings which reduces your install time...

www.sstubes.com

 

[erickson]

This is what I was looking for

Thanks

 

[fourgearsavoy]

66-74 Mopar B-Body, Holley Dual Feed Set; Steel

Pump to Carburetor Fuel Line For 66-74 Mopar B-Body Holley Dual Feed Set Steel. Our Pump to Carburetor Fuel lines connect the fuel pump on the front of the engine to the carburetor. All lines come Pre-Bent and flared with the correct threaded fittings which reduces your install time...

www.sstubes.com

That is a pretty good deal if it fits good.

Gus

 

[Bee1971]

Does it fit good ? Anyone using that SS Tubes Link

Holley DP on a Big Block

Thanx

 

[erickson]

it fit fine

 

[Bee1971]

Sounds good

Thanx

 

[erickson]

I wish they would make them in 3/8 dia. For my 500”. I’m using it for a template for the 3/8 lane.

 

[Some Car Guy]

Somebody used to sell them in MCG. I haven’t seen them in there in over a decade.

 

[qkcuda]

I bent up my own 3/8 lines for a semi factory look.