Lets see all the cool 66-67 b-body mopar pictures.!!

[67MPRFAN]

Moved my outside for a little bit of sun

 

[67coronetman]

Moved my outside for a little bit of sun

View attachment 717620 View attachment 717624

I can't wait for spring.

 

[Joe66satellite]

Here's mine ,clean California car with a beast of a 440 stuffed in there

 

[Knoxville]

Hey B body brothers. Here's my 67 Belvedere II. I'm a total newbie to this site and the classic car seen. But, here we go. This ride has a 440 with a cam, 727 3 speed automatic torque flight trans with a 2800 stall, new exhaust from front back with Dougs headers and 411 rear end. That's about all I have memorized as of now. Be gentle......

 

[Joe66satellite]

Nice car does it run on pump gas and what do you get for mileage

 

[Knoxville]

Nice car does it run on pump gas and what do you get for mileage

I use 93 octane and she gets around 6 mpg if I'm driving nice.

 

[dnlsctt]

66 coronet “dick landy” inspired build with 413rb bored .40, 4 spd swap.

 

[Joe66satellite]

I use 93 octane and she gets around 6 mpg if I'm driving nice.

Okay thank you do you know what your compression ratio is it seems to me with 11 to 1 I need higher octane and I'm a little leery about using anything below a hundred

 

[BSB67]

BSB. Mom called it Baby Sh** Brown

 

[gdrill]

Mine is getting closer. Should be on the road this spring.

 

[Jc cooper]

67 Gtx I’m building

 

[Jc cooper]

67GTX

 

[HotRod777]

New member, New cruiser /project

 

[Rick@Laysons]

Local customer's car....'67 GTX original un-restored.....pics posted with the owner's permission...

 

[Big bill]

Just getting this going ,it has been sitting for 25 years !!

 

[smallie9]

As a Michigan resident... I say "Well get er goin, don't you know warm weather is on the way, maybe August or so"
,

 

[Big bill]

Oh it's done he is a street Rat /6

 

[JackpotJim]

Out of winter storage, Will need to wash about a 100 lbs of mud off of it. We are melting snow in Minnesota.

 

[66 Sat]

Just got back from the beach.

 

[TN Mopar]

Just finished up installing a new interior and fixing a lot of wore out problems
New wire harness and we got some cool pictures after sorting out some wiring issues
Transmission this weekend and hopefully building the new engine soon