Looking for a reputable mopar engine builder..

[Tiperoo]

Hey guys...looking for a reputable engine builder...I was going to go with Muscle Motors Big Block Street Crate 500 cubic inch, 550hp/600 ft/lbs torque but they told me Mike the owner is retiring and closing up shop after they finish there existing orders...bummer...any advice on other mopar builders...thanks for any help..

 

[mmissile]

PM sent.

 

[IQ52]

There is a fine engine builder in Calgary, Alberta

 

[rt-man]

Take a look at the thread 3 down from this one in this forum.

 

[Tiperoo]

There is a fine engine builder in Calgary, Alberta

Thanks do you have a name and number or website? Thanks

 

[Tiperoo]

Take a look at the thread 3 down from this one in this forum.

What name is the thread? I looked but the threads keep moving..thanks

 

[aldal]

Hey guys...looking for a reputable engine builder...I was going to go with Muscle Motors Big Block Street Crate 500 cubic inch, 550hp/600 ft/lbs torque but they told me Mike the owner is retiring and closing up shop after they finish there existing orders...bummer...any advice on other mopar builders...thanks for any help..

I am confused I thought Muscle Motors was coming out with "The Block" that could be used as a wedge or a Hemi....anybody have any insight on whats up?

http://www.hotrod.com/articles/incredible-new-block-can-make-hemi-wedge/

 

[Tiperoo]

I am confused I thought Muscle Motors was coming out with "The Block" that could be used as a wedge or a Hemi....anybody have any insight on whats up?

http://www.hotrod.com/articles/incredible-new-block-can-make-hemi-wedge/

I wish I was wrong but this is what his guy Eric (Al) Budden told me on the phone Friday night...

 

[IQ52]

Thanks do you have a name and number or website? Thanks

He is a member here. Very knowledgeable.

Challenger340

 

[Glenwood]

You can also try Tim at for hemis only. He is in Bewdley Ontario.

 

[moper]

Can also try RAMM (screen name) on FABO or Moparts.

 

[IQ52]

Can also try RAMM (screen name) on FABO or Moparts.

WOW, How could I have forgotten about Jesse?

And I'm sending a PM with the phone number of another builder in Canada. Says he is busy until fall/winter if you can wait.

 

[GetX'd]

I know the guy that built my 440 to about what you're looking for - north of Minneapolis- very knowledgeable, reasonable guy that stands behind his work. Maybe a bit far for you - if not let me know.