M&H engine harness

[revoke36]

Trace the wire back to the bulkhead connector cavity, which one is it? There were no fork connections used on an original ’72 engine harness.

Got my answer from m&h! Thanks a ton to all for all the help!

This lead goes to the solenoid connection on the starter relay. The other end attaches to a carburetor solenoid. Note that there will also be the solenoid lead from the positive battery cable that continues from the solenoid connection on the starter relay down to the starter.

 

[72RoadrunnerGTX]

Found it as well, that would be a distributor advance solenoid, not a carburetor solenoid. Not all engines had them, California only likely. Strange M&H would include that lead as part of the harness, the ’72 engine harnesses I’ve bought from them in the past did not have it.

 

[dadsbee]

Well I had the right spot anyhow....