AngryPossum
Member
Hi, any mechanics with some advice please.
I just installed an electric fuel pump to my 1985 Mercruiser 140hp Inboard Outboard Engine, I removed the mechanical pump and blocked it off with a block off plate.
I'd like to know if I can run the positive power lead from the 12 volt electric fuel pump to the positive lead to the choke wire on the carb, (purple wire).
In what I have read, the voltage may drop to 9 volts on the choke wire. Any advice would be greatly appreciated.
Photo Enclosed below. I'm thinking of tapping to or off that wire connected to the carb choke terminal.
I just installed an electric fuel pump to my 1985 Mercruiser 140hp Inboard Outboard Engine, I removed the mechanical pump and blocked it off with a block off plate.
I'd like to know if I can run the positive power lead from the 12 volt electric fuel pump to the positive lead to the choke wire on the carb, (purple wire).
In what I have read, the voltage may drop to 9 volts on the choke wire. Any advice would be greatly appreciated.
Photo Enclosed below. I'm thinking of tapping to or off that wire connected to the carb choke terminal.
Last edited: