N20

[Nxcoupe]

have seen that a few times researching

finally found the NGK site that had a several hundred page catalog that broke it down by dimensions etc. what do you feel about resister or non if using computer controlled?

Resistor plugs. Resistor plugs are there to reduce RF noise. They don't affect spark at all.

 

[Hemirunner]

Resistor plugs. Resistor plugs are there to reduce RF noise. They don't affect spark at all.

Paramount with EFI. Monte was definitely a legend and extremely smart with the internal combustion process in general not limited to nitrous.

 

[WS23U1]

I have mine on a progressive controller and also use an MSD grid with a 350ish on the first stage and another 400ish on the second stage. Also run a Racepak driveshaft speed sensor for traction control.

View attachment 1405261

What total timing are you running?

 

[dragrazor]

Resistor plugs. Resistor plugs are there to reduce RF noise. They don't affect spark at all.

Thank you, I understand that, was concerned now that my Charger is computer controlled. I have given up on a 5/8 hex and went to larger hex, they do fit.

 

[biomedtechguy]

I didn't see anyone mention RING GAP.
The rings have to "be gapped for N0² or the added heat can close the gap.
Maybe you already know this?