No lights, ignition, nothing.

[72_roadrunner]

Just finished the interior on my Satellite yesterday and to celebrate I got a new Pioneer stereo installed at a local stereo shop. A little later that day after I got home I noticed the stereo started to blink on & off and now nothing works No lights, ignition, nothing works now I checked the fusebox and bulkhead for any loose wires or melted terminals but didn't find anything. Any help you guys have is appreciated. Thanks.

 

[waygun]

Radio installers may have reconnected the battery but did not tighten it up???
Check power at the starter relay--which feeds the inside of the car,and also feeds the fusible link as well.

 

[72_roadrunner]

Thanks Wagun. I'll check out the starter relay I think your right I just really hope the fusible link isn't fried I hate dealing with anything electrical that was the main reason why I let a shop install the Pioneer. Installers didn't disconnect the battery and I already checked my battery connections too. I just hope it will be easy fix and not a freakin headache.

 

[72_roadrunner]

Got most things working again loose connections at bulkhead & at ammeter gauge. Now the only thing not working is ignition I can get it to crank over at the starter relay switch but won't start?

 

[kidmopar]

check the neutral safety switch wire and its on the far left corner of the relay on the bottom connect it to ground, if it starts its a bad neutral safety switch

 

[72_roadrunner]

Got it fixed I found 1 more bad connection from the steering wheel coupler connector. Also cleaned the bulkhead connector with a wire brush & contact cleaner and then packed all 3 connectors with lots of die-electric grease :icon_thumright: Electrical problems are gone