Oil Pump Bolts

[Robliepse]

I'm finally putting my 440 back together and I'm missing the bolts that hold my oil pump to the block. It's a standard OEM type pump and I need to go out and get some new bolts but I'm not 100% sure of the length, size and thread of the bolts. In an attempt to prevent a couple of trips to the store I was thinking someone here might know the answer.

thanks for your help.

 

[bigmanjbmopar]

http://store.440source.com/Oil-Pumps/products/55/

 

[Cranky]

You can also measure the length of the bolt holes on the pump and then add 1/2" plus the thickness of a lock washer and gasket and try the hardware store. Thing is, automotive bolts can be a special length vs hardware store stuff.

 

[clemul]

Page 3 has what you need:

http://www.amkproducts.com/Catalog_PDF/196-201.pdf