parting out 62-74

[67project]

mark, Do you have any fender and door trim for a 1967 Charger?

Thanks
Mitch

 

[zagnut55]

Hi. I'm looking for trim for a 66 Belvedere 2. Rear window trim including wrap around to side windows paint divider trim and all drip rail trim. Also passengers door sill trim. That's it for now.

 

[moparmarks]

Hi. I'm looking for trim for a 66 Belvedere 2. Rear window trim including wrap around to side windows paint divider trim and all drip rail trim. Also passengers door sill trim. That's it for now.

Sorry I don't have any of that right now

- - - Updated - - -

Mark have any pass floor pans for 66 coronet front to rear thanks Lindsay

Sorry I'm out of stock on those pans right now.

- - - Updated - - -

Do you have any inside door trim or any tail light trim for a 66 Coronet?

Sorry I don't

 

[thedodgeman]

I am looking for several things for a 1966 Coronet 440 2Dr Hardtop.
The parts are; Right door panel top rail trim, Right Mirror, Rear trim Bezels from the tail light extensions, and Rear Bumper Brackets. If you have these, Please let me know!!
Thanks.

 

[74charger07ram]

I have a 74 Charger, 318 single exhaust. I want to add duals. There is a bracket on top of the cross member above the rear axle on the right side(passenger). The bracket is welded on and has two nuts welded on. The two welded nuts hold the bracket for the exhaust pipe behind the muffler. Do you have this bracket that is welded to the cross member for the left side(driver)?

 

[apostle228]

Do you have the front bumper core and front bumper brackets for a '73 RR/Satellite?

 

[mike71ssp]

Wanting a rear torsion bar 73-4 charger... Old dash pad also to refinish... Mike

 

[thedodgeman]

Looking for rear bumber brackets for a 66 Coronet 440.
Thanks

 

[70b5bluerunner]

I am looking for a 69 Coronet deck lid and rear quarter extensions. Any help?

 

[moparmarks]

I am looking for several things for a 1966 Coronet 440 2Dr Hardtop.
The parts are; Right door panel top rail trim, Right Mirror, Rear trim Bezels from the tail light extensions, and Rear Bumper Brackets. If you have these, Please let me know!!
Thanks.

I think I have the rear trim for the extensions, I'll check. Sorry don't have any of the other parts right now.

- - - Updated - - -

Wanting a rear torsion bar 73-4 charger... Old dash pad also to refinish... Mike

OK I'll bite. What is a rear torsion bar??? Sorry no dash pads.

- - - Updated - - -

I am looking for a 69 Coronet deck lid and rear quarter extensions. Any help?

Sorry no deck lid but I'll check on the extensions.
Thanks

- - - Updated - - -

Do you have the front bumper core and front bumper brackets for a '73 RR/Satellite?

Have two front bumpers with mounts.
I'll send a PM.
Thanks

 

[moparmarks]

Looking for rear bumber brackets for a 66 Coronet 440.
Thanks

Sorry I didn't have any.
Thanks

- - - Updated - - -

I am looking for a 69 Coronet deck lid and rear quarter extensions. Any help?

Sorry I didn't have the extensions.
Thanks

- - - Updated - - -

I have a 74 Charger, 318 single exhaust. I want to add duals. There is a bracket on top of the cross member above the rear axle on the right side(passenger). The bracket is welded on and has two nuts welded on. The two welded nuts hold the bracket for the exhaust pipe behind the muffler. Do you have this bracket that is welded to the cross member for the left side(driver)?

Hi actually the drivers side pipe has the plate that bolts to the under rear seat pan for a different hanger. Sorry I don't have that setup right now.

 

[icecat66]

need torsion bars for 73/74 charger big block?
shipping to Danville Pa 17821..

 

[moparmarks]

need torsion bars for 73/74 charger big block?
shipping to Danville Pa 17821..

Sorry just have some from a 318 car right now.
Thanks

 

[icecat66]

Is there a difference if so what is it??

 

[moparmarks]

Smaller diameter making for a lighter weight spring. Car won't handle very good with the weight of a big block

 

[JWZ]

Hi, Moparmarks! Do you have these Chrome pcs for 1963 Plymouth Sport Fury 2 door HT: passenger side roof drip rails, driver side 3 pcs Chrome/Red/White/Blue behind rear seat glass on side of roof, driver side Y piece next to sun visor? Thanks! JW

 

[moparmarks]

Hi, Moparmarks! Do you have these Chrome pcs for 1963 Plymouth Sport Fury 2 door HT: passenger side roof drip rails, driver side 3 pcs Chrome/Red/White/Blue behind rear seat glass on side of roof, driver side Y piece next to sun visor? Thanks! JW

Sorry all I have right is trim from a 63 Belvedere 4-dr.
Thanks

 

[JWZ]

Merry Christmas! Thanks! Please, keep me in mind if you run across anything!

Sorry all I have right is trim from a 63 Belvedere 4-dr.
Thanks

 

[challenger666]

Looking for the metal parts for a dome light for my 62 dodge. I have the lense and bezel. The metal parts are welded to cross support in the roof. I know this fits multiple years. Thanks

 

[myates43]

Do you have front wheel well chrome trim for 73 Charger ?