Pic and dimensions needed, '70 rr floor pan.

[torredcuda]

Need pic of this bracket and location and pic, diameter and dimensions of gas pedal holes in the front floor pan.

 

[eldubb440]

I dont recall seeing or installing that particular bracket on any floor pan?

 

[torredcuda]

I took one off the original pan but it was rusty and had to make a new one so just want to make sure it looks like the factory one.

 

[dadsbee]

Speedo cable clip.. is double hooped. I'm looking for better pics.

 

[torredcuda]

OK, I thought I found a blurry pic that showed double hooks. Mine must have had one side rusted off, I guess I`ll have to remake it. If you find better detailed pics that would be great. Thanks!

 

[dadsbee]

Found dimensions in my 10 million pictures....

 

[dadsbee]

Not sure why my desk top won't load this one. Took a shot with my phone off my monitor.. Gas pedal left bolt hole is straight fwd from the last pan "roll"

 

[torredcuda]

Anyone else with dimensions or pics?

 

[HawkRod]

My 70 RR has original floors - they were surprisingly in good shape and did not need replacement.

It is hard to get a good picture with the car on the lift. I can confirm what @dadsbee said that it is a double hoop. Note that mine is not used now because I have a Passon A-855 overdrive and the speedo cable is attached on the opposite side of the transmission.

Here is a picture of that same floor prior to restoration:

 

[torredcuda]

Thanks! I really thought mine was only one loop as it didn`t look like the other part was rusted off as it was a straight, clean edge. Unless there were two different versions - what plant was yours built at?

 

[dadsbee]

If you look closely at my picture of the pedal bolt holes, you can see the spot weld holding the speedo cable clip in place.

 

[dadsbee]

Don't forget the rail clip..

 

[dadsbee]

 

[HawkRod]

Thanks! I really thought mine was only one loop as it didn`t look like the other part was rusted off as it was a straight, clean edge. Unless there were two different versions - what plant was yours built at?

My car was built October 1969 in Los Angeles.

 

[torredcuda]

Ok, everything I've seen is double loop so - done!